- Nov 6, 2018
- Lenovo Horizon 2
- HD 4200
- Mobile Phone
You can ditch the IntelGraphicsFixup.kext. I am running Mojave via GA-H170N-WIFI and Intel 3.70 GHz Core i3-6100 with Intel® HD Graphics 530 via DVI connector. Attached are my clover settings. Additionally, I've installed the following KEXTs:
trying to get HD530 to work as dual display. Currently have Saphirre RX580 . Enabled Internal graphics set up as screen shots. Will start to boot with HD5390 as prinmary graphics. It will start to boot Apple logo and progress bar run and then its flashes and goes black screen but continues to boot. When I switch on other monitor connected to RX580 all is good. It shows both graphics in Sys info . Screenshots are my current config. Running 10.14.4. How can I fix black screen? Do I need to patch framebuffer? Using latest lilu and WEG
Update: Finally got it running dual monitors. HD530 only has 1536MB memory but both monitors function
Set ig 0x193B0005 and inject intel, Lilu and WEG. Have to boot into whatever monitor is set to primary
I have the Elitedesk 800 G2 and I've quite successfully installed Mojave. Everything works except graphics. I only get 1024x768. I've read about some monitor problems, but I also have some artifacts in finder, so I guess it's the driver?
I've tried fakeID: 0x19160000, 0x19120000, 0x12345678, 0x19020000
I've checked: Intel inject
My steps are:
1. Boot inte Mojave
2. Start Clover configurator, mount EFI.
3. Open EFI -> EFI -> CLOVER -> config.plist with Clover configurator.
4. I try to experiment with some changes.
5. Save the file to same directory.
6. Shutdown and restart.
Am I doing something wrong in these steps?
Do I need to install Whatevergreen or lilu? Do I need to compile these?
Can I use kextbeast to install whatevergreen and lilu?