- Joined
- Jul 18, 2019
- Messages
- 3
- Motherboard
- ASRock Z390 Extreme 4
- CPU
- i7-8700
- Graphics
- UHD 630
- Mac
- Mobile Phone
Goal
To install macOS Mojave 10.14.6 with Samsung M.2 SSD 970 EVO Plus.
Issue
I have followed UniBeast installation guide, but the installer would not show up.
The images of log with verbose mode are attached as "log-1_1.jpg" and "log-1_2.jpg".
I found "AppleNVMe Assert failed" and "IOReturn IONVMeController::CreateSubmissionQueue" messages in the log, so
I tried removing M.2 NVMe SSD and rebooting.
However, the installer still didn't show up.
Here is the log of this trial.
The log of this trial are attached as "log-2_1.jpg" and "log-2_2.jpg".
Related issues
Configuration
PC
Note that 970 EVO Plus needs firmware update, so I updated it.
BIOS
Ver. 2.30
I made the following changes from default setting:
Advanced\Chipset Configuration
VT-d: Enabled -> Disabled
Share Memory: Auto -> 64MB (https://www.tonymacx86.com/threads/solved-how-to-enable-uhd-630-on-mojave.264327/)
Advanced\Super IO Configuration
Serial Port: Enabled -> Disabled
Advanced\USB Configuration
XHCI Hand-off: Disabled -> Enabled
UniBeast/Clover
UniBeast 9.20
Clover EFI installer v2.4k r4920
I didn't make any modification on config.plist.
Host Mac
MacBook Air Mid 2012
To install macOS Mojave 10.14.6 with Samsung M.2 SSD 970 EVO Plus.
Issue
I have followed UniBeast installation guide, but the installer would not show up.
The images of log with verbose mode are attached as "log-1_1.jpg" and "log-1_2.jpg".
I found "AppleNVMe Assert failed" and "IOReturn IONVMeController::CreateSubmissionQueue" messages in the log, so
I tried removing M.2 NVMe SSD and rebooting.
However, the installer still didn't show up.
Here is the log of this trial.
The log of this trial are attached as "log-2_1.jpg" and "log-2_2.jpg".
Related issues
Mohave Installation Stuck On "IOReturn IONVMeController::CreateSubmissionQueue"...
Hello All, I've been trying to get OS X Mohave or High Sierra installed on my PC for two days now. Whenever i start the installation from clover, it gets this far and then stops completely (verbose in attached image) "IOReturn IONVMeController::CreateSubmissionQueue(uint16_t, uint8_t)::2742:SQ...
www.tonymacx86.com
Configuration
PC
Motherboard | ASRock Z390 Extreme 4 |
CPU | Intel i7-8700 |
GPU | Intel UHD Graphics 630 (CPU integrated) |
RAM | CFD Crucial DDR4-2666 16GB x2 |
SSD | Samsung M.2 SSD 970 EVO Plus |
HDD | Western Digital 4TB HDD WD40EZRZ-RT2 (SATA) |
Combo Drive | ASUS BC-12D2HT (SATA) |
PSU | RAIDMAX Cobra Power RX-800AE-M |
Note that 970 EVO Plus needs firmware update, so I updated it.
Tool & Software Download | Samsung Semiconductor Global
Download various software related to your product, including Samsung Magician, designed for use with Samsung's memory products, and find related information.
www.samsung.com
BIOS
Ver. 2.30
I made the following changes from default setting:
Advanced\Chipset Configuration
VT-d: Enabled -> Disabled
Share Memory: Auto -> 64MB (https://www.tonymacx86.com/threads/solved-how-to-enable-uhd-630-on-mojave.264327/)
Advanced\Super IO Configuration
Serial Port: Enabled -> Disabled
Advanced\USB Configuration
XHCI Hand-off: Disabled -> Enabled
UniBeast/Clover
UniBeast 9.20
Clover EFI installer v2.4k r4920
I didn't make any modification on config.plist.
Host Mac
MacBook Air Mid 2012