- Joined
- Sep 24, 2019
- Messages
- 1
- Motherboard
- ASUS Z390M-PRO
- CPU
- i7 9700k
- Graphics
- UHD 630
Hey,
For the past 3 days, I've been trying to setup my hackintosh without any success. I've followed many guides on how to do it, including the tonymacx86 one. I also configured my BIOS as told on the tonymacx86 guide.
I always try to install in verbose mode, and it seems to always be getting stuck on the [PCI configuration end] message. Sometimes it gives me the no nvram variable but I seem to fix it by removing some drivers/kexts.
During the many attempts of the installation I've tried to remove one stick of RAM, placing an NVIDIA GeForce 1050 graphics card and removing the SSD, but nothing worked.
I've also tried a different approach that I saw on a thread on tonymacx86 that said to mount the OS image on the USB drive using command line and a variation of clover as posted here:
www.tonymacx86.com
I've tried using an older version of "vanilla" Clover but without any success.
I would really like to hear anyones opinion on it as I need the hackintosh ready to work.
Here's my hackintosh specs:
Processor: Intel i7 - 9700k ~ 3.6GHz
Motherboard: ASUS TUF Z390M-PRO GAMING
SSD: Samsung 860 EVO NVMe M.2 1TB
RAM: 2x HyperX Predator DDR4 16GB 3000MHz
Graphics: Intel UHD 630
For the past 3 days, I've been trying to setup my hackintosh without any success. I've followed many guides on how to do it, including the tonymacx86 one. I also configured my BIOS as told on the tonymacx86 guide.
I always try to install in verbose mode, and it seems to always be getting stuck on the [PCI configuration end] message. Sometimes it gives me the no nvram variable but I seem to fix it by removing some drivers/kexts.
During the many attempts of the installation I've tried to remove one stick of RAM, placing an NVIDIA GeForce 1050 graphics card and removing the SSD, but nothing worked.
I've also tried a different approach that I saw on a thread on tonymacx86 that said to mount the OS image on the USB drive using command line and a variation of clover as posted here:
Clover UEFI Boot Mode v2.4k r4961
Installs Clover bootloader for UEFI booting only to the EFI System Partition of the selected destination drive. Installs AptioMemoryFix.efi, PartitionDxe-64.efi and ApfsDriverLoader-64.efi in /EFI/CLOVER/Drivers64UEFI/. Includes CustoMac default...
www.tonymacx86.com
I've tried using an older version of "vanilla" Clover but without any success.
I would really like to hear anyones opinion on it as I need the hackintosh ready to work.
Here's my hackintosh specs:
Processor: Intel i7 - 9700k ~ 3.6GHz
Motherboard: ASUS TUF Z390M-PRO GAMING
SSD: Samsung 860 EVO NVMe M.2 1TB
RAM: 2x HyperX Predator DDR4 16GB 3000MHz
Graphics: Intel UHD 630
Attachments
Last edited:
