Mojave Hackintosh/RX580 Odd Issues - Help!

[cpike]

Recently completely nuked my High Sierra Hackintosh and setup a new Mojave install.
Got everything up and running with the hardware listed at the bottom of this post and everything seemed fine until my wired mouse started jumping around randomly. I noticed it only goes crazy when I have 1 or more programs open or open several safari windows.
Watch this video to see what I'm talking about:

Is this a CPU problem? Memory Problem? How should I proceed with troubleshooting?

Hardware:
Intel Core i7-4790K 4 GHz Quad-Core Processor
Gigabyte GA-Z97-HD3 ATX LGA1150 Motherboard
Crucial Ballistix Sport XT 32 GB (4 x 8 GB) DDR3-1866 Memory
Samsung 850 EVO-Series 250 GB 2.5" Solid State Drive
Sapphire Radeon RX 580 8 GB NITRO+ Video Card
EVGA SuperNOVA G2 550 W 80+ Gold
Acer XB271HU

MultiBeast Configuration:
Quick Start > Clover UEFI Boot Mode
Drivers > Audio > Optional 3 Port (5.1) Audio Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC
Drivers > Misc > FakeSMC Plugins
Drivers > Misc > FakeSMC HWMonitor Application
Drivers > Network > Atheros > AtherosE2200Ethernet v2.2.2 Drivers > Network > Realtek > RealtekRTL8111 v2.1.0d1
Drivers > USB > 3rd Party USB 3.0
Drivers > USB > 7/8/9 Series USB Support
Drivers > USB > Remove XHCI USB Port Limit
Drivers > USB > USBInjectAll
Bootloaders > Clover UEFI Boot Mode
Customize > System Definitions > iMac > iMac 14,2
Customize > Graphics > Core Graphics Fixup AKA WhateverGreen

 

[trs96]

Is this a CPU problem? Memory Problem? How should I proceed with troubleshooting?

I would start by creating a custom USB-SSDT for that Z97 motherboard. The USB port limit patch is not for longer term use, only for port discovery. See the guide by UtterDisbelief. Best place to start.

A Beginner's Guide to Creating a Custom USB SSDT

If the prospect of reading through complex guidance to configure your USB ports gives you the heebie-jeebies then this guide is for you. We’ve pared it to the bone, researched the facts and tried to present them in a way that makes this complex subject easier to understand for someone just...

www.tonymacx86.com

 

[cpike]

Ok cool. I’ll give that a shot tonight and get back to you. Thanks!

 

[cpike]

I would start by creating a custom USB-SSDT for that Z97 motherboard. The USB port limit patch is not for longer term use, only for port discovery. See the guide by UtterDisbelief. Best place to start.

A Beginner's Guide to Creating a Custom USB SSDT

If the prospect of reading through complex guidance to configure your USB ports gives you the heebie-jeebies then this guide is for you. We’ve pared it to the bone, researched the facts and tried to present them in a way that makes this complex subject easier to understand for someone just...

www.tonymacx86.com

Oooooook so I finally finished the USB-SSDT and I'm still having massive mouse craziness. The video I posted early show the problem I'm still having. Any tips? This mouse thing is making me crazy!

 

[cpike]

Bump? Still having the issue shown in the video above.
Tried different mice, displays and nothing changes. Help!

 

[Feartech]

Bump? Still having the issue shown in the video above.
Tried different mice, displays and nothing changes. Help!

have you tested the mouse on another machine?

 

[cpike]

have you tested the mouse on another machine?

Yes. Using a Logitech G502 wired. Just fine. I've also tried installing Lilu and Whatever Green which didn't help. Still having issues