Contribute
Register

Mojave 10.14.4 Port Limit Removal Patch

Status
Not open for further replies.
Hello.

Yes, this is correct :thumbup:
so I guess that answers my question
so I need to enter all 3 of them
yes it used to be just one patch
but no big deal
I still see it like only one patch but now is a set of 3

so I also have to install, usb inject all
where should I install it?

I have clover config file setup with kext inject = detect as jaymonkey recommended in his guide
that way I load all the 3rd part kext extensions from L/E

so I guess I should also install usbinjectall there and repair permissions
right?
 
And very limiting. No more having to choose what ports to enable or give USB 3.1 Gen 2 functionality.

The above statement, while absolutely true, was only written to poke @UtterDisbelief in the side. Hey buddy!

:silent:

Or is that USB 3.2 Gen 1x2 ?

The path of ease has no rewards :) - And they don't make it easy for us.

(Currently I'm 100 miles away from my desktop and posting from my phone, or I'd be more polished. This is what they call dedication :))
 
Last edited:
so I guess that answers my question
so I need to enter all 3 of them
yes it used to be just one patch
but no big deal

so I also have to install, usb inject all
where should I install it

I have clover config file setup with kext inject = detect as jaymonkey recommended in his guide
that way I load all the 3rd part kext extensions from S/L

so I guess I should also install usbinjectall there and repair permissions
right?

Oh my. Read post #12, or the whole thread if you are a masochist.
 
so I guess that answers my question
so I need to enter all 3 of them
yes it used to be just one patch
but no big deal
I still see it like only one patch but now is a set of 3

so I also have to install, usb inject all
where should I install it?

I have clover config file setup with kext inject = detect as jaymonkey recommended in his guide
that way I load all the 3rd part kext extensions from L/E

so I guess I should also install usbinjectall there and repair permissions
right?

How and where to install kexts:
 
Oh my. Read post #12, or the whole thread if you are a masochist.
ok let me see if I can explain the situation
first I already installed the patches and also usb inject all
so everything is working fine
thank you

the whole thing about kexts here or there is just the same thing as SSDT vs the port limit patch
basically it comes down to personal preference in most cases
a person might prefer the SSDT method but might not know how to get the job done
then that person would not have any other choice but to use the port injector
as much as that person will love to use the SSDT method
so you also have to take knowledge under consideration

another thing is exactly what jay monkey explained
which is true, I been building hackintosh for more than 10 years
and not all systems are all the same
so the first rule a hackintosh builder has to learn is exactly what jaymonky said
what works in one system might not work in another

don't think because I'm saying this I'm against or anything like that
also I don't know why you called me "masochist"
but is all good I'm not going to get mad just because of that

in my case the detect method works perfectly fine on my build
so I use that one because I believe is the right way to do it
yes there is big possibility that I might be wrong
but since is working fine then there is no reason why I shouldn't continue to use it

so is like i said before is just a matter of personal preferences or what the person thinks it works better for them
this is not about one being easier than the other
but if I can't make one work then I have to use the other
as long as I can use one of the 2 then is fine

I might not be the prefer method but I can also be used as a temporary fix
until the person managed to get the other method working
then the person can switch to the one they like, once they get it to work

so as you can see there are always alternatives, no one can forced someone to do something one way
unless that is the only way to do it
if there is more than one way then the person has a choice
let the person decide, you have you personal preference but you have to respect the other person way of thinking even if you think or consider that person to be wrong

in your case maybe the detect method didn't work for you
but it works for me and also works for others
the same way it might not work for others the same way it didn't work for you
"compatibility"

I only made a few questions about the patches
once is clear that there is a 3 set patch
then the users can easily add the patch to clover and they can decide
how and where they want to install the kexts
in my case i install them to L/E but I didn't tell others to install them there or do it that way
they can install it whatever they like

no problem
I hope is all clear now

peace
 
Last edited:
Yeah, it worked perfect on Asrock Z370 Pro4. Thank you so much!
 
The only credit I claim for the following patch is having great search skills :)

10.14.4 Port Limit Removal Patch by PMHeart

Seems to work perfectly but more testing needed to confirm full functionality.

Works perfect for me. USB 2.0, USB 3.0 and 3.1 now correct (also the HUB's). :)
 
It's works!!!!!!! thank you!!!! :headbang:
 
MultiBeast update and run Remove ACHI Port Limit solved the problem for me !!!
Nothing else
!!!
Now 3.1 and 3 working perfect for me, finally.
 
If i use it, do i still need Hackintool to patch kext?
 
Status
Not open for further replies.
Back
Top