- May 11, 2011
- Asrock B365M Phantom Gaming
- UHD 630 + RX 580
- Mobile Phone
Here you go. If you will have a black screen and can't boot, just remove boot args -wegoff .It`s look like that with new driver during export process GPU is about 100% utilized.
This is the current one.
This one will work, remember to enable IGPU in bios, multi monitor option, 128 mb.Still the same, black screen but i think that system is running, just without display.
Great now i see both GPU from the system report.This one will work, remember to enable IGPU in bios, multi monitor option, 128 mb.
Connect the displays only to the Discrete GPU RX 580, dont use the IGPU.Great now i see both GPU from the system report.
But second display is not detected, it`s look like that only one display can be attached at the time, event connect on IGPU or EGPU.
In regards to the video i try with the same process for export and now timing is 6min40sec.
EGPU is not loaded on 100%, about 70 80% and CPU is normal as well.
Unfortunately, i dont have good tool to check both GPU utilization, from the system monitor showing EGPU history.
Thanks in advance for your help, tell me if i can do someting for you!