Contribute
Register

Moarfish's build - GA-B75M-D3H i5 3570K

Status
Not open for further replies.
Hi Moarfish
I have the same motherboard with i7 3770k
Can you please post your org.chameleon.Boot.plist
 
Thanks for the link Moarfish. Only trouble is when I open the kexts neither of them have an info.plist file in the contents.
 
Well, I officially give up. I managed to find the info.plist file and I tried that fix 4 separate times unsuccessfully. Tried disabling onboard graphics unsuccessfully. I think I've installed Mountain Lion about 25 times and every time I use Multibeast it won't boot. Using -v the last message I get is macx swap on success before it turns white. No error messages at all. Sometimes I get a previous shutdown cause 3 message before macx swap on success.

Guess I'll just stick to booting from usb until I can afford an Ivy Bridge. I've got a native instruments external sound card anyway so I don't really need to enable anything in multi beast.
 
sppaschal said:
Hi Moarfish
I have the same motherboard with i7 3770k
Can you please post your org.chameleon.Boot.plist
Click to expand...

I am just leaving everything default of multi beast. Did not modify org.chameleon.Boot.plist.
I will post it later today. What kind of problem are you facing and require you to take a look at it? I think 3770K is working perfectly with this board right?
 
I have problem with hd4000,I must turn off and then turn on my samsung tv to be able to see the desktop
 
Hi, i was wondering how different is the D3H from the D3P ( B75-D3P is on recommended builds ) , im currently running my i5 3570K with an H77-DS3H and it runs fine, but i'd like to downsize a bit, so wondering which one should i get, thanks.
 
coolest2004 said:
Hi, i was wondering how different is the D3H from the D3P ( B75-D3P is on recommended builds ) , im currently running my i5 3570K with an H77-DS3H and it runs fine, but i'd like to downsize a bit, so wondering which one should i get, thanks.
Click to expand...

Here is the comparison Chart
http://www.gigabyte.com/products/comparison/list.aspx?ck=2&pids=4203,4315

To highlight, B75M-D3P got these while D3H do not:
Display Port Connector.
An additional Marvell 88SE9172 SATA Controller

of course, for a higher price.
D3P $91.99 vs D3H $74.99

So why pay for the additional for something you don't need? Most people who use B75 chips are for the low cost and D3H is the best choice at the moment unless you need display port connector. However, if you have the budget for a display port monitor, you would go for a high end graphic card don't you?
 
sppaschal said:
I have problem with hd4000,I must turn off and then turn on my samsung tv to be able to see the desktop
Click to expand...

Here is my file below.

You are connecting to the TV so I think you are connect by HDMI. I am connecting my monitor through DVI. Did you try to update your Chimera to the latest version? I've heard that the latest one got better support for HD4000. You can also try to add EFI String to the boot plist file you mentioned.

Thank you.

Kdaz8.png


Here is the EFI String for your reference
Code: 
<key>device-properties</key>

<string>7f0000000100000001000000730000000200000002 010c00d041030a000000000101060000027fff04002c000000 4100410050004c002c00690067002d0070006c006100740066 006f0072006d002d0069006400000008000000050062011400 00006800640061002d0067006600780000000d0000006f6e62 6f6172642d31</string>
 
LukeAnnett said:
Well, I officially give up. I managed to find the info.plist file and I tried that fix 4 separate times unsuccessfully. Tried disabling onboard graphics unsuccessfully. I think I've installed Mountain Lion about 25 times and every time I use Multibeast it won't boot. Using -v the last message I get is macx swap on success before it turns white. No error messages at all. Sometimes I get a previous shutdown cause 3 message before macx swap on success.

Guess I'll just stick to booting from usb until I can afford an Ivy Bridge. I've got a native instruments external sound card anyway so I don't really need to enable anything in multi beast.
Click to expand...

Hay, don't give up
This guy got Sandy Bridge i5 working with this board. Take a look:
http://www.tonymacx86.com/mountain-...48-ga-b75m-d3h-i5-2400-8-gb-ddr3-working.html
 
Thank you very much moarfish for your help!
Yes i use hdmi.i have try also dvi to hdmi cable.
I also had problem with onboard realtek lan.I was able to dawnload from my nas server via afp with speeds about 60/mbs but to upload a file to server had problem.I tried both drivers from multibeast but no luck.So for now i use an extra pci card with realtek 8111 chipset and is working very good.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top