- Joined
- Mar 18, 2019
- Messages
- 5
- Motherboard
- Gigabyte Z97N-WIFI
- CPU
- i5-4690K
- Graphics
- RX 580
I'm trying to create a hackintosh for the first time and after watching many videos, researching on the forums, and making sure my hardware is compatible, I created a boot USB drive using Unibeast. I then went into my computer's BIOS and made sure all of the settings were correct. Once I had everything double checked, I hit F10, then loaded into the boot menu, tried to boot from the USB and the only message appearing is, "Missing operating system". I went back into BIOS and checked the settings again, which ended up being correct, I also went back to the tonymacx86 forums to see any resolutions. I found some people who had this issue who just and to check their BIOS, reset the CMOS, switch to a USB 2.0 port, and create a GUID partition. The only one I didn't try was the GUID partition. Long story short, I have an error message that I want to resolve and I have not found any solutions so far. Any help is appreciated!
These are the specs for the PC that I'm making into a hackintosh:
Intel Core i5-4690K
16GB DDR3 Ballistix RAM
Gigabyte Z97N-WIFI Mobo
Asus Dual Series Radeon RX 580 4G
Seagate 250GB 7200RPM HDD (Going to replace soon)
750W Powerspec PSU
NZXT H200 (White/non i-series)
These are the specs for the PC that I'm making into a hackintosh:
Intel Core i5-4690K
16GB DDR3 Ballistix RAM
Gigabyte Z97N-WIFI Mobo
Asus Dual Series Radeon RX 580 4G
Seagate 250GB 7200RPM HDD (Going to replace soon)
750W Powerspec PSU
NZXT H200 (White/non i-series)