Contribute
Register

Memory issues

Status
Not open for further replies.
Joined
Sep 29, 2013
Messages
172
Motherboard
Asus Z690-Plus Wifi D4
CPU
i9-12900K
Graphics
UHD 770, RTX 2080 Super
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
I have been running Yosemite for some time now with my memory running at 2400, then today I updated my bios from F10 to F11.
Loaded optimized defaults, and made the changes that I had made before and.. Yosemite won't boot. No kp, no error, just nothing.. it starts to boot and then hangs after just a few lines.

After a bit of trial and error I figured out that it was due to memory frequency settings, if I use any setting other then "auto" Yosemite won't boot.. before I had it at "profile 1"

Flashed F10 again and made the settings I had before, now that won't work either.. it's auto or no boot.

The thing is it ran perfectly at 2400 before, now I'm stuck at 1333 with no clue as to why.. this is driving me nuts.

Mb is Z87M-D3H, Corsair Vengeance Pro 2400Mhz, chimera bootloader

Anyone have any idea what I'm missing here/what's wrong? :banghead:
 
Switched to Clover and now it works, somewhat.. system report says 2285 when it's set to 2400, but at least Yosemite boots. Now to learn Clover, guess I have to specify memory in smbios for it to show up right :|
 
Status
Not open for further replies.
Back
Top