Contribute
Register

Mavericks: No Audio - Realtek ALC AppleHDA [Guide]

Status
Not open for further replies.
Read Post #1, do what is requested.

I already done this section.

Everything looks like a good. I can see sound icon and sound panel. but I cannot hear nothing. I also tired with external speaker.

and those are my system information.

Acer 5935G Laptop / Mavericks 10.9 / Intel chipset ICH9 / BIOS Version 2.09 / Intel Core2Duo T6600 2.20 / NVIDIA GeForce GT 240M
 

Attachments

  • hardware.png
    hardware.png
    130.8 KB · Views: 523
  • audio.png
    audio.png
    131.1 KB · Views: 447
  • intel audio.png
    intel audio.png
    142.1 KB · Views: 408
  • Screen Shot 2013-10-29 at 13.27.54.png
    Screen Shot 2013-10-29 at 13.27.54.png
    86.1 KB · Views: 413
  • Screen Shot 2013-10-29 at 13.28.00.png
    Screen Shot 2013-10-29 at 13.28.00.png
    84.8 KB · Views: 331
  • Screen Shot 2013-10-29 at 13.28.10.png
    Screen Shot 2013-10-29 at 13.28.10.png
    93.2 KB · Views: 395
I already done this section.
Where is IOReg?
IV. Problem Reporting

  1. Description of audio problem, including the following information
4. Copy of IOReg - IOReg/File/Save a Copy As…, verify file (not ioreg.txt), see Tools/2​
 
Where is IOReg?
IV. Problem Reporting

  1. Description of audio problem, including the following information
4. Copy of IOReg - IOReg/File/Save a Copy As…, verify file (not ioreg.txt), see Tools/2​

here is the IOReg file.

I just installed Mavericks 10.9 to my Acer 5935G laptop and after that I installed Multi Beast 6.0.0 version. I choose EasyBeast and GraphicsEnabler=Yes and Realtek ALC 889 without DSDT (you can see in picture at attachment).

after that I can see sound icon on top black (enabled) and I can see in sound page all sound drives. the problem is I cannot hear sound. (you can check those picture in my previous post about sound settings).



many thanks for your helping.
 

Attachments

  • Screen Shot 2013-10-29 at 18.00.31.png
    Screen Shot 2013-10-29 at 18.00.31.png
    176.8 KB · Views: 500
  • armut’s MacBook Pro.ioreg
    2.6 MB · Views: 179
I updated previous my post. thanks your helping
 
the problem is I cannot hear sound.
If you tried all the audio output devices and there is not sound, Acer has configured the audio codec and audio devices incompatible with OS X AppleHDA.kext audio. Search the Laptop Forum for a solution.
 
If you tried all the audio output devices and there is not sound, Acer has configured the audio codec and audio devices incompatible with OS X AppleHDA.kext audio. Search the Laptop Forum for a solution.

ok. I'm going to re-install maverick. I want to ask one more question. If I check the sound section there no sound When I installed new mavericks and multi beast EasyBest (without sound driver.)

in this step what do you suggest ?

thanks a lot.
 
ok. I'm going to re-install maverick. I want to ask one more question. If I check the sound section there no sound When I installed new mavericks and multi beast EasyBest (without sound driver.)
I don't understand the question.
 
I don't understand the question.

Let me explain;

I reinstalled mavericks to my laptop now. It's totally clean and new. and then I just installed multi beast (please check picture what I installed.)

MultiBeast Configuration - 2013-10-30 02:43:17 ----------------------------------------------------------------- Quick Start > EasyBeast
Drivers > Disk > 3rd Party SATA
Drivers > Misc > ElliottForceLegacyRTC
Drivers > Misc > EvOreboot
Drivers > Misc > FakeSMC v5.3.820
Drivers > Misc > NullCPUPowerManagement
Drivers > Misc > PS/2 Keyboard/Mice and Trackpads Drivers > System > AppleRTC Patch for CMOS Reset Bootloaders > Chimera v2.2.1
Customize > Boot Options > Basic Boot Options Customize > Boot Options > GraphicsEnabler=Yes Customize > Boot Options > Hibernate Mode - Laptop Customize > Boot Options > Use KernelCache Customize > System Definitions > Mac Pro > Mac Pro 3,1 Customize > Themes > tonymacx86 Black

and now in sound section there is no audio (if I install Realtek alc 889 without DSDT by multi beast).

please check the pictures and could you please give some Idea If you have suggestion.

thanks a lot :)
 

Attachments

  • Screen Shot 2013-10-30 at 02.45.45.png
    Screen Shot 2013-10-30 at 02.45.45.png
    58.8 KB · Views: 263
  • Screen Shot 2013-10-30 at 02.46.22.png
    Screen Shot 2013-10-30 at 02.46.22.png
    73.3 KB · Views: 356
in sound section there is no audio (if I install Realtek alc 889 without DSDT by multi beast).
Works as designed. If there is no audio enabler (kext, dsdt, ssdt or bootloader) there is no audio.
 
Status
Not open for further replies.
Back
Top