macOS Native Discrete GPU Power Management

[corint1]

hi...can anyone update this code ? for radeon 7 not working .... was good for vega but for radeon 7 show only "device utilization" in procent...many thanks ....

ioreg -l |grep \"PerformanceStatistics\" | cut -d '{' -f 2 | tr '|' ',' | tr -d '}' | tr ',' '\n'|grep 'Temp\|Fan\|Utilization\|Clock'

 

[toleda]

Although it didn't show up, but the 580X sees working fine with acceleration

Unrelated; 580X PM is fixable, see Post #1

 

[toleda]

can anyone update this code ? for radeon 7

Off topic, start a new thread.

 

[Shanghaidaddy]

@toleda, do I need to inject dAGPM.kext for Sapphire RX 580 card on Mojave 10.14.4? Thanks.

 

[Jackhammer1967]

To anyone that can help,
Ok this is my first time posting to get help here. My problem is I use apple Magic Trackpad and the cursor jumps around uncontrollably sometimes so I thought GPU power management would cure it. I've changed my system Definition 3 times to match Table one on this post to no avail. I've expanded the board ID in AppleGraphicsPowerManagement.kext and copied the IGPU and pasted it over the Mac AMD on the dAGPM.kext and then copied the board ID and pasted it there to. Then I tried just copying the board ID to Mac AMD thinking the IGPU would come with it and that didn't work. At one time under AGPM in IOReg I had the Heuristic ID under AGPM in IOReg showing ff-ff-ff-ff but don't remember how I got it to show it like that. Anyway no my Heuristic ID is 04-00-00-00 which I think if for Nvidia and I even deleted the Mac-Nvidia part out of dAGPM.kext , so I'm at a loss and my cursor is still out of whack. any help would be much appreciated, Thanks.

 

[Jackhammer1967]

To anyone that can help,
Ok this is my first time posting to get help here. My problem is I use apple Magic Trackpad and the cursor jumps around uncontrollably sometimes so I thought GPU power management would cure it. I've changed my system Definition 3 times to match Table one on this post to no avail. I've expanded the board ID in AppleGraphicsPowerManagement.kext and copied the IGPU and pasted it over the Mac AMD on the dAGPM.kext and then copied the board ID and pasted it there to. Then I tried just copying the board ID to Mac AMD thinking the IGPU would come with it and that didn't work. At one time under AGPM in IOReg I had the Heuristic ID under AGPM in IOReg showing ff-ff-ff-ff but don't remember how I got it to show it like that. Anyway no my Heuristic ID is 04-00-00-00 which I think if for Nvidia and I even deleted the Mac-Nvidia part out of dAGPM.kext , so I'm at a loss and my cursor is still out of whack. any help would be much appreciated, Thanks.

My PCI WIFI card is Broadcom BCM9436CDAX if that has anything to do with it.

 

[toleda]

do I need to inject dAGPM.kext for Sapphire RX 580 card on Mojave 10.14.4?

See Post #1/I. Before You Start

 

[toleda]

My problem is I use apple Magic Trackpad and the cursor jumps around uncontrollably sometimes so I thought GPU power management would cure it

Not related, off topic.

At one time under AGPM in IOReg I had the Heuristic ID under AGPM in IOReg showing ff-ff-ff-ff

Correct

my Heuristic ID is 04-00-00-00

Not correct. Fix, see Post #1

 

[toleda]

My PCI WIFI card is Broadcom BCM9436CDAX if that has anything to do with it.

Off topic.

 

[Jackhammer1967]

I changed my System Definition back to 15.1 and now I have the ff-ff-ff-ff under Heuristic Id , But under AGPM controller there are no values.