- Joined
- Feb 23, 2017
- Messages
- 273
- Motherboard
- MSI H97 GAMING 3
- CPU
- i5-4690
- Graphics
- HD 4600 & GTX 650 Ti
- Mobile Phone
@toleda, @pastrychef, hi, in addition to my post above, I've added DropOEM/NO, Generate/CStates/NO, Generate/PStates/NO to my config file and tried but it was the same. Then digging in this thread showed me ssdt_lpcb-9series.aml needed for OS to load AppleLPC, it wasn't loaded before, so I renamed the file as SSDT-LPCB.aml and copied it to patched folder, after restart IOReg shows that AppleLPC is loaded now. X86PlatformPlugin with 32 PStates and X86PlatformShim were already loaded with just PluginType=Yes (without DropOEM and C/PStates/No entries).
I see 800MHz in a split second once in awhile when the OS is idle but as I already mentioned it keeps jumping up and down. Is it normal?
If it is normal, then maybe I don't need extra items (DropOem, C/Pstates) in config file as well as SSDT-LPCB.aml file? Because the results are the same even if AppleLCP loaded or not.
What do you guys think?
Thanks!
Only PluginType=Yes, AppleLPC not loaded.
PluginType=Yes along with DropOem, C/Pstates, SSDT-LPCB.aml therefore AppleLPC loaded.
I see 800MHz in a split second once in awhile when the OS is idle but as I already mentioned it keeps jumping up and down. Is it normal?
If it is normal, then maybe I don't need extra items (DropOem, C/Pstates) in config file as well as SSDT-LPCB.aml file? Because the results are the same even if AppleLCP loaded or not.
What do you guys think?
Thanks!
Only PluginType=Yes, AppleLPC not loaded.
PluginType=Yes along with DropOem, C/Pstates, SSDT-LPCB.aml therefore AppleLPC loaded.