Contribute
Register

macOS 10.15.7 Update

Status
Not open for further replies.
Unprecedented to see a .7 release for macOS/OS X.

Maybe Apple realizes how bad Catalina was as a release. It's much better now, but still bad.
Like every other flippin news article in 2020 stating Unprecedented event... :crazy:


Confirmed successful install on OpenCore 6.1 z390 Aorus pro build. Be patient if loading bar doesn't seem to be progressing. Many reboots.
 
Cloned the Catalina partition onto another disk and installed the 10.15.7 Combo Update by booting the disk on my Kaby Lake machine. No problems. Then cloned the updated Catalina onto the NVMe SSDs on my main machine and Kaby Lake machine. System booted fine using Clover 5119.
 
I only had some difficulties switching from Clover r5119 to r512x because of the new OCQuirks and some power management issues.
After finding a solution I could easily update as usual!
 

Attachments

  • sysinfo.png
    sysinfo.png
    117.8 KB · Views: 126
Updated from 10.15.6.
installed latest versions of WhateverGreen, Lilu, appleALC, latest clover R5122
downloaded 10.15.7 from apple support.
installed.
auto reboot. install started from Install Catalina - data
auto reboot. directly boot from Catalina, without update.
had to manually restart, and select Install from Catalina - data
then it went smoothly
auto reboot to updated Catalina 10.15.7
everything is working fine.

View attachment 489415
How did you update the clover?
 
How did you update the model number?

See the guide above how to change your "model"
 
How did you update the clover?
If you use Clover Configurator. There is a tool in the left pane to update it.

1) Backup
2) Mount EFI for boot partition
3) Open Clover Configurator
4) Select "Install/Update Clover"
5) Click on "Check Now"
6) Select version of Clover you want from pulldown
7) Follow Instructions for installation.

NOTE: Don't update past 5122 unless you figure out your Quirks requirements, otherwise you will not be able to boot into the system and will have to retrograde back to a lower version. Also, make sure your installer USB is working to boot as a backup.
Screen Shot 2020-10-20 at 6.50.13 AM.png
 
I am already on Clover r5122, so all that was necessary was to update the Lilu, WhateverGreen, and AppleALC kexts. Installed just fine, no problems.
 
Status
Not open for further replies.
Back
Top