Contribute
Register

macOS 10.15.7 Update

Status
Not open for further replies.
Success, but had to reset NVRAM using clover F11 at boot, and had to use the spoof graphic ID 0x12345678 to get through install.
Clover 5122 and all up to date kexts (WhateverGreen.kext AHCI_Intel_Generic_SATA.kext AppleALC.kext GenericUSBXHCI.kext IntelMausi.kext Lilu.kext USBInjectAll.kext VirtualSMC.kext)
 
Success as far as I've tested, but had to reset the BIOS. After that the install was clean.
Clover release 5122 and all of my kexts are up to date.
Screenshot 2020-09-25 at 20.13.11.png
 
Last edited:
Update completed after all but I’d like to understand why it’s always recommended to update Clover?
78559A7B-257F-4D2D-962A-4B60F7B5DC89.jpeg
 
No problems, Opencore 0.6.1

Screen Shot 2020-09-25 at 12.55.46 PM.png
 
Upgraded my Dell Optiplex 9020 with internal HD4600. After the upgrade I can no longer set 4k resolution, it's stuck at 2560x1440. Upgraded to the latest WEG, Lilu, Clover, no change. Any thoughts?


Edit: Looks like my Dell P2715Q or DP cable is being flaky. Switched DP cables and it's back to 4k, very odd.
 
Last edited:
Screen Shot 2020-09-25 at 4.26.17 PM.jpg

Ryzen System updated no problem with OC 0.6.1
 
had some problems... but at the end it is ok so far..

1. updated clover from 51xx (forgot which one i had) to latest 5122
2. had to manually select the "data" partition on the second boot...
a. first boot worked​
b. second boot went to the OSX original partition​
c. so i reinstalled again​
d. the first boot went automatic, after it rebooted on the second boot I manually selected the “data” partition​
3. upon the restart screen went black, so had to VNC in to restart, then was ok.
4. some reason i have a guest account now...
 
Last edited:
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top