macOS 10.15.5 Update

[InsomnIaHackintosh]

For now, all working. The update under OC made things feel like a real Mac, went smooth with 3 restarts.

Under 10.15.4 felt a bit laggy for some reasons. Will report if that's the case on 10.15.5

 

[tonymacx86]

Updated without issue on 7 Series 'CustoMac Mini' system:

GA-H77N-WIFI - i3-3225 - HD 4000

 

[tonymacx86]

Updated without issue on 8 Series 'CustoMac Mini' system:

GA-H87N-WIFI - i3-4340 - Radeon HD 7970

 

[taskrov]

Updated Lilu and WG to the latest versions, and then upgraded both of my systems with no issues via Sys Preferences.

 

[tonymacx86]

Updated without issue on 300 Series system:

GA-Z370N-WIFI - i7-8700K - Radeon RX Vega 56

 

[deeveedee]

Catalina 10.15.5 installed without issues on my HackPro5,1 / RX580. I needed to temporarily change the MacModel to MacPro6,1 (with a valid Board-ID) so that the 10.15.5 installer would not block the installation. Once installed, 10.15.5 runs fine with SMBIOS MacModel MacPro5,1 and boot-arg -no_compat_check. My upgrade steps are here.

 

[caniggia]

Updated the 3 kexts, stayed on Clover 5107 and 26 minutes later it is ready!

 

[Ploddles]

As pointed out in another thread on here, anyone using Carbon Copy Cloner, and possibly SuperDuper - but I haven't checked SD, please read the WARNING on their website and if you want to make a fresh bootable clone download the new beta.

CCC WARNING

 

[rdt1950]

update did not work had to change 8.1 to iMac Pro up date went through

 

[DrTom]

This was a clean and easy update on both my 2012 MacBook Pro and my PowerMac G5 Red. I think that it updated the firmware on the MacBook Pro. On the G5, two reboots, used Clover r5118, and I had to manually select the Install macOS from SSD the first reboot. So far I haven't run into any issues.

I backed up just prior to updating, but I won't do any CCC backups until Catalina 10.15.5 is properly supported, as per their website's warning.