macOS 10.15.4 Update

[huug]

Avoid Clover r5109. I had a background problem with it in themes. Tonymacx86 theme with white background instead of black, white font unreadable.

Reinstalled Clover r5107

 

[foxesareamazing]

I'm on r5108 and went straight from 10.15.3 to 10.15.4 with supplemental update. I updated the Whatevergreen, Lilu and AppleALC kexts first.

I had upgraded to r5019 first and had the same background problem with themes, so I had downgraded to r5018 before installing the 10.15.4 update.

My install was smooth apart from that after the first reboot my system crashed at the installer screen. I tried again and it was plain sailing from thereon in.

 

[mac20170615]

Hey

View attachment 456831

Try this link (GitHub Repo) https://github.com/CloverHackyColor/CloverBootloader/releases/

This resolved my upgrade issue on 10.14.3! Thanks for the great work!

 

[paulplay]

Update worked, but Clover didn't chose the right disk, I had to do this manually. (Clover r5113)

 

[kdolaac]

Updated clover 5111 installed update, went smooth - 2 reboots 35

motherboard
ga-b250m-ds3h

minutes

 

[j0s3ph]

Updated to Clover r5114, Lilu (1.4.3), WhateverGreen (1.3.8), ran the auto updated, and it worked perfect.

 

[joomlaguy]

Succes on Intel NUC8i7BEH

I first upgraded Clover to 5115. Running the installer failed every time so I ended up by manually copying CLOVERX64.efi and BOOTX64.efi to the EFI partition. That worked getting Clover to 5115.
I then started the 10.15.4 update process. It took me a while to figure out I had to choose the -DATA partition to boot from during the update
The updated ended with the bless tool error but the machine booted fine. I cleaned the Mac OS Install Data from /System/Volumes/Data.

 

[octane007]

Nice!

 

[aftamohd]

Success, wheeeee

I have Gigabyte Z370 and i7. I did install it last weekend, and it works. Mine is 10.15.3
should I upgrade directly? While installing the software, initially, I had some difficulty as I had my motherboard graphics enabled and apart from that I had no other issues.

 

[Hans1199]

I updated yesterday and now the customised FB for my RX 570 does not work anymore (need custom FB to use HDMI port). Any suggestions what might be different? I used the Acre FB and changed it to my layout. To me it looks like the FB did not change from the old one..