macOS 10.15.3 Update

[Consigliere]

Awsome!
Updated from HighSierra with HFS so
- I needed to boot recovery mode and convert disk to APFS
- I needed the vanilla AppleHDA.kext to get back the sound but other than that it seem to work like a charm.

 

[CmdrX3]

No issue here, installed straight from Software Update

Asrock Z390 Extreme4 & 9700K, Intel UHD 630, OpenCore

 

[sixsixtysix]

No Issues here, installed through the App Store in about 12 minutes.

Asus X299 Prime Deluxe II, 10980xe, Dual Radeon VII's, Clover v2.5k_r5103

 

[cedron]

It works like a charm.

 

[davorin]

Update went fine...though had two choose manually the "Installer" disk in Clover...

Now had the machine running for a while...screen turned dark..and when moving mouse/pressed a key the machine resetted...though in energy saving everything is turned off...

 

[denovo]

Via software update, no problems.

 

[maryhack2018]

Gigabyte Aorus Gaming 9 - i9_7920X_LGA2066_12core_24thread - Radeon Vega Frontier Edition
Updated by means of System.app \ Software Update utility from 10.15.02 to 10.15.03 = Success

t0) Fenvi T919 wifi board BCM94360CD don't works with 10.15.03, it worked OOB well with last version 10.15.02.
Any idea? Please.

t1) t0 ENVI Problem solved:
The problem was that I had the ENVI card installed in PCIEX4_1 and that I recently added a new M2 disk in the M2M_32G slot. On the Aorus Gaming 9 motherboard, the PCIEX4_1 and M2M_32G slots share the data bus, and only one of the slots can be occupied at a time.
To re-operate the WIFI ENVI card I changed it to a new location in the PCIEX16_2 slot.
Now there are only one minor issue, SIDECAR doens`t work, any Idea?

 

[Alexandro]

Smooth update via System Update here.
Took 2 restarts and 15 minutes to complete.
Ancient Clover (version 4934).

 

[cruzeta]

Worked.

 

[Nald0z]

Another painless upgrade, Thanks again!

Same process as usual for the most part. Backup w/ CCC. Update Kexts (WEG, LILU, Apple ALC) in EFI/CLOVER/Kexts/Other. Upgraded Clover to 5102 (TonyMac x86 build). Ran the upgrade from Software Update. Took about 30 minutes for upgrade to complete. Only thing different this time around was removing kexts from /Library/Extensions/ as instructed in Stork's post above.