Contribute
Register

macOS 10.14.6 Supplemental Update 2

Joined
Dec 29, 2015
Messages
29
Motherboard
GA-Z97P-D3
CPU
i7-4970K
Graphics
GT 740
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
That's what was dowloaded when I launched the last update.

Last download of this Update, manual update :

2019-12-18 21:36:06+01 Ronalds-iMac Installer[2215]: Opened from: /Volumes/Security Update /SecUpd2019-002Mojave.pkg
2019-12-18 21:36:07+01 Ronalds-iMac Installer[2215]: Product archive /Volumes/Security Update /SecUpd2019-002Mojave.pkg trustLevel=501
2019-12-18 21:37:58+01 Ronalds-iMac Installer[2215]: Upgrade: "Security Update "
2019-12-18 21:37:58+01 Ronalds-iMac Installer[2215]: Upgrade: "Security Update "
2019-12-18 21:37:58+01 Ronalds-iMac softwareupdated[578]: Attempting to adopt manual product: Security Update
2019-12-18 21:38:07+01 Ronalds-iMac Installer[2215]: ManualAdoption: Adopted /Volumes/Security Update /SecUpd2019-002Mojave.pkg
2019-12-18 21:38:31+01 Ronalds-iMac system_installd[1041]: Installed "Security Update " ()


Still in BuildVersion: 18G103. and the update system proposes :

softwareupdate -l
Software Update Tool

Finding available software
Software Update found the following new or updated software:
* Security Update -10.14.6
Security Update (10.14.6), 1531842K [recommended] [restart]
 
Joined
Dec 29, 2015
Messages
29
Motherboard
GA-Z97P-D3
CPU
i7-4970K
Graphics
GT 740
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
Finding available software
Software Update found the following new or updated software:
* Security Update -10.14.6
Security Update (10.14.6), 1531842K [recommended] [restart]


FOUND THE SOLUTION in another thread :

I hit F3 on Clover Menu, And I have 2 "Install Mac OS from MacOS" and one with "Install from Preboot".
I choose the first : SSD drive activity, screen showing "Install..." with graphics and time of 36 minutes (in fact one) one reboot, I choose again "Install Mac OS from MacOS"... and reboot.

After this :

Ronalds-iMac:~ rva$ sw_vers
ProductName: Mac OS X
ProductVersion: 10.14.6
BuildVersion: 18G2022
Ronalds-iMac:~ rva$
 
Joined
Oct 30, 2019
Messages
11
Motherboard
Gigabyte Z490 Vision D
CPU
i5-10400
Graphics
RX 580
Mac
  1. iMac
  2. MacBook Pro
Classic Mac
  1. Apple
Mobile Phone
  1. iOS
FOUND THE SOLUTION in another thread :

I hit F3 on Clover Menu, And I have 2 "Install Mac OS from MacOS" and one with "Install from Preboot".
I choose the first : SSD drive activity, screen showing "Install..." with graphics and time of 36 minutes (in fact one) one reboot, I choose again "Install Mac OS from MacOS"... and reboot.
Tried this fix but it did not work for me. So I dug a bit deeper and eventually got the Security Update to install.

I deleted a folder from the drive called "macOS Install Data" and ran the updater again and it worked.

Trevs OptiMac macOS Install Data.png
 
Joined
Dec 29, 2018
Messages
2
Motherboard
ASUS ROG STRIX Z370-I GAMING
CPU
i7-8700K
Graphics
RX580
Mac
  1. iMac
  2. MacBook
  3. MacBook Pro
  4. Mac mini
Classic Mac
  1. iMac
Installed but, not exactly smoothly. Machine rebooted for the initial attempt, hung with no progress on the bar (and pink horizontal lines on the upper part of the screen) for over an hour. Manually rebooted with the “Boot FileVault PreBooter from Preboot” Clover entry and, the update was still pending. Rebooted from the “Boot FileVault Install from Preboot” (or something similar – not rebooting to check). The installer ran for about 25 minutes with a very slow progress bar (monochrome screen, apple logo), restarted, displayed a proper update install screen showing 18 minutes remaining, rebooted after about a minute. Came back up with the monochrome screen, took another ~25 minutes to boot again, displayed a proper update screen showing 35 minutes remaining. That ran for another 10 minutes. After that, the system rebooted and, the update was installed.

Thanks to everyone here sharing their experiences for the clues that got me past this one.
 
Joined
Jul 2, 2015
Messages
22
Motherboard
MSI B150M Mortar
CPU
G4560
Graphics
RX 570
Mac
  1. iMac
For some unknown reason certain HACKS take forever to update...... I have a i3 that takes over 45 minutes to update:banghead:.... and a g4560 that take 15minutes.... GO FIGURE..... so my 2 bits is to just wait it out......HAPPY FREAKING NEW YEAR and HAPPY HACKINTOSHING:)
 
Joined
Jun 5, 2010
Messages
94
Motherboard
Gigabyte Z490 AORUS Elite
CPU
i9-10850K
Graphics
RX 6900 XT
Mobile Phone
  1. iOS
FOUND THE SOLUTION in another thread :

I hit F3 on Clover Menu, And I have 2 "Install Mac OS from MacOS" and one with "Install from Preboot".
I choose the first : SSD drive activity, screen showing "Install..." with graphics and time of 36 minutes (in fact one) one reboot, I choose again "Install Mac OS from MacOS"... and reboot.

After this :

Ronalds-iMac:~ rva$ sw_vers
ProductName: Mac OS X
ProductVersion: 10.14.6
BuildVersion: 18G2022
Ronalds-iMac:~ rva$
If you have Clover configured to select your macOS disk on boot, when installing updates it will switch and boot from an "Install Mac OS" volume if one is present. This makes installing updates a hands-off process. Caveat is if you are using encrypted disks, you need to use the Preboot volumes.

The setup is straight forward:
  1. Download and install Clover Configurator
  2. Run it, in Mount EFI section, mount the EFI partition from you primary boot disk.
  3. Open config.plist in /EFI/EFI/CLOVER directory.
  4. In Boot section in the 'Default Boot Volume' field, type the name of your primary macOS volume.
  5. If you have multiple boot volumes you select, you will want to increase the Timeout value.
  6. Save.
The next time you boot, your machine should boot hands off and the next update should also install hands off.
 
Joined
Jan 10, 2019
Messages
2
Motherboard
ASUS TUF Z390-PLUS
CPU
i5-9600K
Graphics
RX 570
Might be a stupid question, but is the latest version of Clover recommended for updating to 10.14.6? I am currently running 10.14.2 and using clover 5.3.2.0.
 

Stork

Admin
Staff member
Joined
Sep 21, 2010
Messages
13,203
Motherboard
Gigabyte Z690 Aero G
CPU
i5-12600K
Graphics
RX 6800 XT
Mac
  1. MacBook Pro
  2. Mac mini
  3. Mac Pro
Classic Mac
  1. Power Mac
  2. PowerBook
Mobile Phone
  1. iOS
Might be a stupid question, but is the latest version of Clover recommended for updating to 10.14.6? I am currently running 10.14.2 and using clover 5.3.2.0.
For 10.14.6, r4961 will do the job. However, you can also use the newer builds. The tonymacx86 Downloads > Clover latest build is r5102 which works great for Catalina.
 
Joined
Mar 16, 2015
Messages
392
Motherboard
HP 6300 SFF-V3.08
CPU
i5-3570
Graphics
GT 640
Mac
  1. MacBook Air
  2. Mac mini
  3. Mac Pro
Classic Mac
  1. Power Mac
  2. Quadra
  3. SE/30
Mojave has also been updated to 18G3020.
18G3020.png
 
Joined
Sep 24, 2011
Messages
114
Motherboard
Dell Optiplex 9020 MT A25
CPU
i7 4790
Graphics
HD4600
Mac
  1. MacBook Pro
  2. Mac mini
  3. Mac Pro
Classic Mac
  1. Power Mac
Mobile Phone
  1. iOS
Installed latest 10.14.6 Security Update 2020-001 via Software Update, no issues.
 
Top