Contribute
Register

macOS 10.14.4 Update

Status
Not open for further replies.
This worked for me flawlessly, but I have heard that it has bricked my friends install on a older Thinkpad..
398229
 
From 10.14.3
No problems.
398294
 
macOS Mojave 10.14.2 ⇒ 10.14.4

Brief & Sweet:
Runs smooth after minor tweaks
  • Clover update r4769 ⇒ r4895
  • Lilu 1.2.5 (not updated)
  • WhateverGreen not in use, still use the deprecated binary Azul frame-buffer patch via <KextsToPatch> in config.plist
  • AppleALC 1.3.0 (not updated)
  • IO80211Family.kext in /S/L/E replaced by High Sierra one for no longer supported Wifi card (AR9380)
Mojave_14.4-Update.png
 
With regards to the ALC1150 issue with sound being lost with sleep, there was a recent change to AppleALC to fix what appears to be the same issue for the ALC1220 series. I figured it'd be worth a shot to apply the same change to the 1150 definitions as well. It appears (so far) to have resolved the issue on my system.

Try the attached kext if you have the issue
Thanks Greg. This fixed my ALC1150 no sound after sleep issue on Z97x-SLI
 
Gigabyte Nvidia GTX 660-Ti / Radeon RX 570 4 GB
GA-Z77X-UD5H

Works fine but made me sweat at the beginning.

It took ~1hour with 2? 3? reboots.
 
I had no problem going to 10.14.3 but 10.14.4 is causing an issue.
Clover R4910
X9Dai / Dual E5-2697 V2's
Vega 64

Stuck at gIOScreenLockState

I run dual monitor set up so tried with single HDMI monitor connected but no luck.
 
Upgraded from App Store 10.14.3 -> 10.4.4, after upgrading

Clover -> 4919
AptioMemoryFix -> R25
AptioInputFix -> R25
AppleALC -> 1.3.7
Lilu -> 1.3.5

Two restarts. Took about 20 min.

Didn't mount a couple of volumes, I mounted them manually.

movaje.10.4.4.png
 
Upgrade attempts failed. Both App Store and download. System reboots to install, a progress bar appears with no movement. After 30 minutes I have to manually shut down to abort install. Looks like I am stuck with 10.4.3
 
Status
Not open for further replies.
Back
Top