Contribute
Register

macOS 10.14.4 Update

Joined
Feb 17, 2011
Messages
121
Motherboard
Gigabyte Z370-HD3
CPU
i5-8660K
Graphics
RX 580
Mac
Mac Pro
Classic Mac
Power Mac
Mobile Phone
iOS
10.14.3 to 10.14.4 via app store update. Upgraded clover to 4862 from 4769, updated to Apple ALC 1.3.6, Lilu 1.3.5 and Whatevergreen 1.2.7 as per info in this thread. Ran like that a couple days just to make sure it was all good. Today disconnected all drives except install one (old habits??LOL) and did the install...took about 15 minutes, started install and then left to make a coffee :) Come back and it was waiting for setup info.

Thanks everyone for all the info in this thread, made this a very painless update!
 
Joined
Jul 15, 2011
Messages
5
Motherboard
Asus ROG Strix Z370-G
CPU
i7-8700K
Graphics
Vega 56
Mac
MacBook, MacBook Pro
Mobile Phone
iOS
This was by far the scariest of all updates I've encountered. The first reboot landed on a blank, black screen. My son came asking what was wrong an hour later. Turned out there was a mouse but nothing more. The keyboard only beeped at me.

A couple of reboots, then a snapshot restore, then a "hey, let's try that again" lead to a couple days of a system that wouldn't boot to system, restore or from USB. It was the oddest thing. Today I updated my BIOS and started over with a fresh USB and Clover config. The Mojave installer wouldn't boot so I walked away. Came back and the system had rebooted and was now at the login screen. :clap::crazy: And "about" states I'm at 10.14.4.

[EDIT 11apr]
Spoke too soon. I can boot from a fresh usb only to the system, not recover or the installer on the usb. I have nearly the same setup as Pastrychef's z370 which looks like he was able to update. I did notice that this update does place a firmware into the apple folder on EFI. Haven't been able to look at the failed boot logs to see what the last 3 lines are before the screen goes blank. I let it sit blank for an hour and a half last night before shutting down. [pic shows where it stalls, then a few lines zoom by before blanking out]

[EDIT an hour later]
Ran the official clover installer (4910) and selected 'customize' so I could reinstall the ApfsDriverLoader and AptioMemoryFix drivers. BAM! I can now boot from the system disk with no apparent issues... yet.
 

Attachments

Last edited:
Joined
Jan 16, 2018
Messages
2
Motherboard
GA-Z270M-D3H
CPU
i5-7600K
Graphics
RX 570
Mobile Phone
iOS
Panic and lookups for about 20 minutes, then it was fine.
Have verbose always on, system seemed to hang too long) screen photo attached. There is a looooong blank screen before output then restart again. Luckily I was distracted looking up strings and let computer sit when it rebooted and all seems fine with this update.
 

Attachments

Joined
Feb 24, 2019
Messages
1
Motherboard
Lenovo T450
CPU
i7-5600U
Graphics
HD 5500
Hi,
Updated Clover, Kexts - FakeSMC, Lilu...
Reboot, pc went into a cyclic reboot. After the removal of the voodoo.kext updated successfully!
This saves the day
 
Joined
Jul 9, 2018
Messages
23
Motherboard
HP Compaq Elite 8300 MT
CPU
i7-3770
Graphics
GT 710
Mac
iMac, Mac mini, Mac Pro
Mobile Phone
Android, iOS
i updated from app store from 10.14.3 to 10.14.4 went well without issues but i had to first update clover and kexts files to get the update other than that no issues even my Nvidia Gt-710 Graphic card work like a charm :)

Screen Shot 2019-04-10 at 10.38.21 PM.png
 
Joined
Oct 18, 2012
Messages
46
Motherboard
GA-Z97X-UD3H-BK
CPU
i7-4770K
Graphics
RX 580
Mac
iMac
Mobile Phone
iOS
Hello All,

i have an issue :

currently running 10.14.3.
Running latest clover 4862 from Tonymac.
Updated to Lilu 1.3.5, WhateverGreen 1.2.7.

Download either combo or classic update
Installing then reboot for first time : Apple is displayed, progression bar stucked at 75%.

Using Verbose display while selecting Installing From Mac OS, i have the following report (see picture)

Any idea folk ?
 

Attachments

Joined
Dec 1, 2010
Messages
1
Motherboard
GA-Z97X-UD5H
CPU
i7-4790K
Graphics
GTX 760
With regards to the ALC1150 issue with sound being lost with sleep, there was a recent change to AppleALC to fix what appears to be the same issue for the ALC1220 series. I figured it'd be worth a shot to apply the same change to the 1150 definitions as well. It appears (so far) to have resolved the issue on my system.

Try the attached kext if you have the issue
Thanks Greg. This fixed my ALC1150 no sound after sleep issue on Z97X-UD5H
 
Joined
May 16, 2013
Messages
8
Motherboard
Gigabyte Z170N-WIFI
CPU
i7-6700
Graphics
RX 560
Mac
iMac, MacBook Pro
Mobile Phone
iOS
I had planned to backup my disk and update clover and kext files per recommendations. I was busy with my day job and eventually, the automatic update kicked off the install at night Looked a little dicey as it had rebooted and I woke up in the morning with the notice that the update couldn't be installed. I rebooted it again twice and the update completed. Appears that everything is working as before ( handoff, BT keyboard/mouse and air pods connect fine ) and sleep/wake works now. Happy I am.
 
Joined
Mar 8, 2014
Messages
2
Motherboard
Gigabyte Z87MX-D3H
CPU
Intel i5-4670K
Graphics
Intel HD4600
Mac
iMac
Mobile Phone
Android
Did an Clover Update to v2.4k r4919 using MultiBeast 11.2.0-4. Then updated macOS using build in system update.
Worked like a charm ;-) Thanks to the forum for all the hard work! :clap:
399305
 
Top