macOS 10.14.4 Update

[mattus]

Just updated my other hack, Pentium G4560, MSI B150M Mortar, Gigabyte RX570 .... had a minor glitch.....system would not boot into the OS on final install reboot .... turned off intel inject at the clover bootscreen and the system started up just fine.

Running latest clover 4895
Updated to Lilu 1.3.5, AppleALC 1.3.6, WhateverGreen 1.2.7
so far so good!

 

[Anachronaut]

Updated Lilu and Clover, and I used system preferences update. All went smoothly.

 

[bubblEgas]

I made sure to un-hide the volumes I had hidden for Clover because I remember seeing an extra "preboot" volume during the last updates (as I did this time as well). Backed up the EFI, installed via MAS, after a couple of reboots and about 25 minutes all is well.



EDIT: CRAP, USB volumes aren't loading for some reason.

 

[isanthosh]

Took 15 to 20 minutes from 10.14.3su Rebooted 3 times. All 3 times I have to select the correct partition from the clover screen. Another easy update. (i3 7100, Gigabyte HD270M) Cheers!

 

[ModMike]

Does anyone have a good system definition for 19,1 and 19,2?

Is there anything critical in there or can I just make my own?

 

[Superbogey]

You could lend me your efi because I have an rx 570 but I do not have graphical acceleration

Not sure if it will help you but here's my working EFI folder - minus the themes folder. Config is minus serial numbers in the SMBIOS tab as well.

 

[Superbogey]

Warning: To those running SMBIOS 18,3 + connectorless iGPU do not update to 10.14.4. There's a widely reported issue related to kernel panic or black boot without disabling iGPU and losing QuickSync. Mods please update the release notes to indicate users of SMBIOS 18,3 + connectorless iGPU should hold off on updates. See:

Installation of 10.14.4 Update Causes KP

Kernel panic on boot after upgrade from 10.14.3 to 10.14.4. Strangely it seems that it's KP after initialization of RX580 gpu. I can hear the GPU fan spin up at the end of the boot process, the screen transitions from the loading bar to black screen and then reboot. The screen is black with no...

www.tonymacx86.com

Mojave 10.14.4 Boots to black screen with headless UHD 630 and RX 580

My system worked fine up until updating to 10.14.4. I have my UHD 630 set to run headless and I use my Saphire RX 580 as my primary. It now after going through the verbose output of boot goes to a black screen upon where it usually shows the apple logo. Any idea why this is happening? I...

www.tonymacx86.com

I'm not seeing either issue on my system so far but I'm running iMac 18,3 headless with an RX560 and not a 580.

 

[DimeVagg]

Same problem here. Asus Z390-A Prime. MacMini8,1

Just noticed, that issue occurs on ASUS PRIME motherboards only. Maybe BIOS update should help ? But don't forget to turn Legacy RTC on in System Time and Alarm Source

 

[pastrychef]

Updated via System Preferences > Software Update without issues.

Update took about 15 minutes and system restarted itself 3 times.

 

[beastyboy]

Wow this update helped my quick sync speed it was working before this update but was getting slow fps in Mac x video converter 200fps and without quick sync 320 from cpu. Now I'm getting 370 quick sync. I'm using the 18.3 iMac, and my Hardware is on my profile.