macOS 10.13.4 Update

[Barryjp]

Coffee Lake i5-8400 and RX560. Was working perfectly under 10.13.3. After the update I have a very slow boot process, eventually a black screen and then the monitor loses signal. Same result with or without RadeonDeinit and with or without whatevergreen.kext. Tried disabling the onboard Intel graphics and this made no difference.

 

[schwadorf]

Can't get signal to my second monitor (connected through DisplayPort) unless I put whatevergreen.kext back. No issues otherwise, everything's working fine.

 

[ashman70]

Coffee Lake i5-8400 and RX560. Was working perfectly under 10.13.3. After the update I have a very slow boot process, eventually a black screen and then the monitor loses signal. Same result with or without RadeonDeinit and with or without whatevergreen.kext. Tried disabling the onboard Intel graphics and this made no difference.

Do you have CSM enabled in your BIOS? Also, do you have lilu.kext installed?

 

[raymondau]

Do you have CSM enabled in your BIOS? Also, do you have lilu.kext installed?

Have you tried using SMBIOS 14.2? I have black screen using 18,2 or 18,3 definition.

 

[ashman70]

Raymondau do you have whatevergreen.kext installed? I have the same\similar GPU to both you and Barryjp, I had to put whatevergreen back to get my other two monitors to work.

 

[Barryjp]

Do you have CSM enabled in your BIOS? Also, do you have lilu.kext installed?

I have tried with or without CSM enabled in the BIOS. I do have lilu.kext as I'm using AppleALC for audio.

 

[johnnylemar]

New patch needed:

<key>KextsToPatch</key>
        <array>
            <dict>
                <key>Comment</key>
                <string>USB 10.13.4+ by PMHeart</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                g32UDw+DlwQAAA==
                </data>
                <key>InfoPlistPatch</key>
                <false/>
                <key>MatchOS</key>
                <string>10.13.x</string>
                <key>Name</key>
                <string>com.apple.driver.usb.AppleUSBXHCI</string>
                <key>Replace</key>
                <data>
                g32UD5CQkJCQkA==
                </data>
            </dict>
        </array>

Hi just wondering where in my confit-plist should I put this. I have attached my plist. I can see where the key is but am not sure if should paste this over what is there already. Thanks

 

[ashman70]

I have tried with or without CSM enabled in the BIOS. I do have lilu.kext as I'm using AppleALC for audio.

Did you backup before the update? Are you able to roll back to 10.13.3?

 

[bogdanw]

Hi just wondering where in my confit-plist should I put this. I have attached my plist. I can see where the key is but am not sure if should paste this over what is there already. Thanks

Yes, I've attached your config.plist corrected with Clover Configurator

 

[Stork]

New patch needed:

<key>KextsToPatch</key>
        <array>
            <dict>
                <key>Comment</key>
                <string>USB 10.13.4+ by PMHeart</string>
                <key>Disabled</key>
                <false/>
                <key>Find</key>
                <data>
                g32UDw+DlwQAAA==
                </data>
                <key>InfoPlistPatch</key>
                <false/>
                <key>MatchOS</key>
                <string>10.13.x</string>
                <key>Name</key>
                <string>com.apple.driver.usb.AppleUSBXHCI</string>
                <key>Replace</key>
                <data>
                g32UD5CQkJCQkA==
                </data>
            </dict>
        </array>

Does this patch replace the MultiBeast USB patch in config.plist?