Contribute
Register

macOS 10.13.1 Update

Status
Not open for further replies.
I had success with the following steps:
  1. Update Clover to latest Revision 4268
  2. Install updated apfs.efi to /EFI/CLOVER/drivers64UEFI/
  3. Use standalone 10.13.1 package installer
  4. Rebooted three times (each time letting Clover pick the default)
  5. Install updated Nvidia web driver 378.10.10.10.20.107
Back in business with everything working as before (audio, messages, etc.)
 
This update will enable the `Enable Power Nap` option in Energy Saver
So If you have issue with this option like me, disable it.
 
Updated using Apple support page Installer.
Some reboots and into the system again with apple native graphics, nvidia prompts to update web drivers, reboot to working state including audio (injected from EFI).
 
Still cannot get past .mkpg missing error.

Setup:

Config.plist: blank values on Firmware Features, Firmware Features Mask, BIOS Release Date, Bios Version.
Running MacbookPro14,1
CSR 0x67
nvdisable=1 (even though I do not have a Nvidia or AMD card installed. Only HD 620)
-disablegfxfirmware

I have tried both OptioDrvFix regular and 2 (but never both simultaneously).
I have tried deleting NVRAM.plist before reboot and install attempt
I cannot delete EmuVariable64. Cannot boot without it

I have updated apfs.efi

This is my INSTALL.LOG:

You should try downloading the dmg file manually and try to update that way.

Also there is a way to manually provide the mpkg File.
As it was not available yesterday i downloaded the updated Apple 10.13.1 full Install MacOS High Sierra.app from App Store and decompressed the InstallESD.dmg inside the Package Contents, inside this InstallESD.dmg you find the Core and OSInstall.mpgk package, these will also perform the update when copied manually to yourMacOSDisk\System\Installation\Packages\ before restart of update.

OSInstall.mpgk has to be in yourMacOSDisk\System\Installation\Packages\
https://support.apple.com/kb/DL1941
 
surprisingly I had a very smooth update. *sidenote, I need to learn how to oc ram lol.
 

Attachments

  • Screen Shot 2017-11-02 at 4.41.10 AM.png
    Screen Shot 2017-11-02 at 4.41.10 AM.png
    672 KB · Views: 268
Hello everyone,
I upgraded 1 real iMac 27" Retina-5K, 1 Hackintosh iMac 18,3 and 2 Hackintosh laptops (Ivy Bridge and Skylake) with the standalone installer. All the installations went well except the one of the skylake laptop who needed a different (older) clover version and fake ig-platform-id (0x12345678).

The real iMac and the Skylake laptop had different installation look from the remaining hackintosh's: all the process passed thru the apple logo and the progress line below, while the hackintosh systems passed thru the "normal" installation window (as when you do a fresh install).
 
Last edited:
How did you download the full 10.13.1? App Store does not give me the option.
You should be able to download it following this link. Perhaps substitute 'us' in the link for you country code.
 
Status
Not open for further replies.
Back
Top