Contribute
Register

MacMini 2011 -i5 2500k - GA-H67N-USB3-B3 - 8GB RAM - H3000

Status
Not open for further replies.
Joined
Jan 31, 2011
Messages
80
Motherboard
Gigabyte H67N-USB3-B3
CPU
i5-2500K
Graphics
HD 3000
Mac
  1. iMac
  2. MacBook Air
Mobile Phone
  1. iOS
MacMini 2011 - Intel i5 2500k - GA-H67N-USB3-B3 - G.Skill Sniper 8GB RAM - Intel HD 3000 Graphics - Sony Blu-Ray


caseml.png

Component List
Intel Core i5-2500K Sandy Bridge 3.3GHz (3.7GHz Turbo Boost) LGA 1155 95W Quad-Core Desktop Processor Intel HD Graphics 3000 BX80623I52500K
http://www.newegg.com/Product/Product.aspx?Item=N82E16819115072
$219.99

GIGABYTE GA-H67N-USB3-B3 LGA 1155 Intel H67 HDMI SATA 6Gb/s USB 3.0 Mini ITX Intel Motherboard
http://www.newegg.com/Product/Product.a ... 813128484R
$149.99

G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBSR
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231417
$39.99

Sony Optiarc Black 12X BD-R 2X BD-RE 16X DVD+R 12X DVD-RAM 8X BD-ROM 8MB Cache SATA 12X Half Height Tray Blu-ray Writer BD-5300S - OEM
http://www.newegg.com/Product/Product.aspx?Item=N82E16827118065
$99.99

Already Owned
Mac OS X 10.7 Lion
http://itunes.apple.com/app/os-x-lion/id444303913?mt=12

Western Digital WD10EADS 1TB 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136317

Acer AL1914 19" Monitor - VGA
http://www.newegg.com/Product/Product.aspx?Item=N82E16824009067

miniDesktop Computer Case 400W - mod. TechSolo TC20


Comments:
I Was looking for a quad core processor, and a Blu Ray drive , a mini system.
The system I picked seemed adequate for my purposes…
I would use my old VGA monitor and i found out How-to
http://tonymacx86.com/viewtopic.php?f=15&t=36335
In future i will substitute my SATA HD with a SSD 6.0Gb/Sata HD.

Installation Process
I essentially followed the instructions on the UniBeast Lion Install page.
Everything went smoothly.

NOTE: to get things working on the initial boot up before running MultiBeast I had to set GraphicsEnabler=no.

I used MacBook8.1 SMBIOS as well as I wanted a cleaner About My Mac. Overall, the system is working like a charm.


Many thanks to all posters on this site .....
 
You can't overclock because of the H67 chipset. :)
Nice build!
 
MacMini 2011 -i5 2500k - GA-H67N-USB3-B3 - 8GB RAM - HD3000

Finally i have added a Corsair Force Series GT 120GB SATA III 6Gbs (SSD) as primary drive.
http://www.newegg.ca/Product/Product.aspx?Item=N82E16820233191
$119.99
I have used Carbon Copy Cloner to clone my OSX Lion partition from HDD to SSD.
I have reinstalled Chimera on SSD and voilà - all works .... :->



The Speed improvement is very good 430 Mb/s read/write.

TRIM enabled with Trimenabler 2.0
http://www.macupdate.com/app/mac/37852/trim-enabler

Cheers

PippoX0
 
MultiBeast incorporates the appropriate TRIM enabler Perl commend. However, since Sandforce controllers perform their own garbage collection, you don't need the TRIM enablers.
 
Status
Not open for further replies.
Back
Top