Hi Everyone, trying to do an install on this motherboard and having a lot of issues with crashing.
the crashes seem to have started happening from when I made the BIOS changes written in the guide for this motherboard, though it could be coincidental.
I installed the ACPI patch on the USB as per instructions.
I can now reach the installer, I choose language, erase drive in Disk Util, then start the installation, at about 75% the computer crashes. I put some tape on the screen and it seems it crashes at the same point every time.
I've noticed that the computer also crashes even in BIOS, and quite a lot.
I've tried resetting the motherboard (shorting the two pins) and started from scratch a couple of times, but get the same results.
Booting in safemode makes it crash before I reach the installer.
If anyone's got any ideas or have had similar problems with the same parts, I'd be very grateful to know.
The fact I'm getting lots of crashes in BIOS suggests I've got a bad part, but have no idea how I'd isolate it, so hoping it's just a BIOS setting that is wrong.
ASUS TUF Z390-Pro Gaming
I5-9400
CPU graphics for now
Corsair Vengeance LPX DDR4 2400MHz - 16GB (2x8)