- Joined
- Dec 22, 2018
- Messages
- 15
- Motherboard
- ASUS ROG STRIX Z390-F Gaming
- CPU
- i7-8700
- Graphics
- RX 580
- Mac
- Mobile Phone
Hi Andre,DUDE! i'm doing this with the same case and similar motherboard, how did you took the side panel lock "thing" apart? i'm stuck at this part, just got the gase today! help me out.
ps: sorry for my inglish but i'm from Brazil
no problem on the English, mine is far from perfect.
The one tip i can give without making additional pictures is the 4 braces that slide with the mechanism are held in place witha small black plate. This plate you can remove fairly easy with a small pincet or screwdriver by just pushing it out.
once you remove that plate, you can remove the actual brace and from that point on the whole divider plate can be removed.
I learned the hard way, and only noticed these little black plates when the divider was damaged. I was lucky that i could repair that damage, but its far easier once you figure that out.
Let me know if this is enough, if not i will try to take a picture (seeing as everything is in place now i want to avoid that).
Good luck