Contribute
Register

Mac OSX 10.12 with X99 Broadwell-E family and Haswell-E family

Status
Not open for further replies.
Sorry for this questions...
but:
-How can I remove DSDT and SSDT
-How can I patch Kext?

I'm new to Hackintosh, so I would be happy about an answer.

Thanks
 
I GOT BOOT!!! kinda.... i was able to get this build as far as
MAC framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers

it just hangs there i have tried different boot flags to no avail. Any suggestions?
 
Build 1
GA-X58A-UD3R |  i7 980 |  GeForce GTX 580
Hello friends

I need your help, I have successfully installed MacOS Sierra 10.12.4.
Hardware:
* X99 Asus Motherboard
* CPU 5930K
* GTX 1070
* Ram 16GB DDR4
* SSD 850 PRO

My question is how can I get better energy management, I've seen IPG catches with very low consumptions and more states.

This is my AppleIntelInfo and IPG

Captura de pantalla 2017-04-20 a la(s) 20.06.04.png

Code: 
Settings:
------------------------------------------
logMSRs..................................: 1
logIGPU..................................: 0
logCStates...............................: 1
logIPGStyle..............................: 1
InitialTSC...............................: 0xb682cbd396 (22 MHz)
MWAIT C-States...........................: 8480

Processor Brandstring....................: Intel(R) Core(TM) i7-5930K CPU @ 3.50GHz

Processor Signature..................... : 0x306F2
------------------------------------------
- Family............................... : 6
- Stepping............................. : 2
- Model................................ : 0x3F (63)

Model Specific Registers (MSRs)
------------------------------------------

MSR_CORE_THREAD_COUNT............(0x35)  : 0xFFFFFF803C7CE700
------------------------------------------
- Core Count........................... : 6
- Thread Count......................... : 12

MSR_PLATFORM_INFO................(0xCE)  : 0x20080C3BF3812300
------------------------------------------
- Maximum Non-Turbo Ratio.............. : 0x23 (3500 MHz)
- Ratio Limit for Turbo Mode........... : 1 (programmable)
- TDP Limit for Turbo Mode............. : 1 (programmable)
- Low Power Mode Support............... : 1 (LPM supported)
- Number of ConfigTDP Levels........... : 1 (additional TDP level(s) available)
- Maximum Efficiency Ratio............. : 12
- Minimum Operating Ratio.............. : 8

MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x8400
------------------------------------------
- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
- CFG Lock............................. : 1 (MSR locked until next reset)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

MSR_PMG_IO_CAPTURE_BASE..........(0xE4)  : 0x10414
------------------------------------------
- LVL_2 Base Address................... : 0x414
- C-state Range........................ : 1 (C6 is the max C-State to include)

IA32_MPERF.......................(0xE7)  : 0x1471C189FB
IA32_APERF.......................(0xE8)  : 0x142795B721

MSR_FLEX_RATIO...................(0x194) : 0xE0000
------------------------------------------

MSR_IA32_PERF_STATUS.............(0x198) : 0x228B00002500
------------------------------------------
- Current Performance State Value...... : 0x2500 (3700 MHz)

MSR_IA32_PERF_CONTROL............(0x199) : 0xC00
------------------------------------------
- Target performance State Value....... : 0xC00 (1200 MHz)
- Intel Dynamic Acceleration........... : 0 (IDA engaged)

IA32_CLOCK_MODULATION............(0x19A) : 0x0

IA32_THERM_INTERRUPT.............(0x19B) : 0x0

IA32_THERM_STATUS................(0x19C) : 0x88410000
------------------------------------------
- Thermal Status....................... : 0
- Thermal Log.......................... : 0
- PROCHOT # or FORCEPR# event.......... : 0
- PROCHOT # or FORCEPR# log............ : 0
- Critical Temperature Status.......... : 0
- Critical Temperature log............. : 0
- Thermal Threshold #1 Status.......... : 0
- Thermal Threshold #1 log............. : 0
- Thermal Threshold #2 Status.......... : 0
- Thermal Threshold #2 log............. : 0
- Power Limitation Status.............. : 0
- Power Limitation log................. : 0
- Current Limit Status................. : 0
- Current Limit log.................... : 0
- Cross Domain Limit Status............ : 0
- Cross Domain Limit log............... : 0
- Digital Readout...................... : 65
- Resolution in Degrees Celsius........ : 1
- Reading Valid........................ : 1 (valid)

MSR_THERM2_CTL...................(0x19D) : 0x0

IA32_MISC_ENABLES................(0x1A0) : 0x840089
------------------------------------------
- Fast-Strings......................... : 1 (enabled)
- FOPCODE compatibility mode Enable.... : 0
- Automatic Thermal Control Circuit.... : 1 (enabled)
- Split-lock Disable................... : 0
- Performance Monitoring............... : 1 (available)
- Bus Lock On Cache Line Splits Disable : 0
- Hardware prefetch Disable............ : 0
- Processor Event Based Sampling....... : 0 (PEBS supported)
- GV1/2 legacy Enable.................. : 0
- Enhanced Intel SpeedStep Technology.. : 0 (disabled)
- MONITOR FSM.......................... : 1 (MONITOR/MWAIT supported)
- Adjacent sector prefetch Disable..... : 0
- CFG Lock............................. : 0 (MSR not locked)
- xTPR Message Disable................. : 1 (disabled)

MSR_TEMPERATURE_TARGET...........(0x1A2) : 0x5F0A00
------------------------------------------
- Turbo Attenuation Units.............. : 0
- Temperature Target................... : 95
- TCC Activation Offset................ : 0

MSR_MISC_PWR_MGMT................(0x1AA) : 0x400000
------------------------------------------
- EIST Hardware Coordination........... : 0 (hardware coordination enabled)
- Energy/Performance Bias support...... : 1
- Energy/Performance Bias.............. : 0 (disabled/MSR not visible to software)
- Thermal Interrupt Coordination Enable : 1 (thermal interrupt routed to all cores)

MSR_TURBO_RATIO_LIMIT............(0x1AD) : 0x2424242424242525
------------------------------------------
- Maximum Ratio Limit for C01.......... : 25 (3700 MHz)
- Maximum Ratio Limit for C02.......... : 25 (3700 MHz)
- Maximum Ratio Limit for C03.......... : 24 (3600 MHz)
- Maximum Ratio Limit for C04.......... : 24 (3600 MHz)
- Maximum Ratio Limit for C05.......... : 24 (3600 MHz)
- Maximum Ratio Limit for C06.......... : 24 (3600 MHz)

IA32_ENERGY_PERF_BIAS............(0x1B0) : 0x0

MSR_POWER_CTL....................(0x1FC) : 0x2904005B
------------------------------------------
- Bi-Directional Processor Hot..........: 1 (enabled)
- C1E Enable............................: 1 (enabled)

MSR_RAPL_POWER_UNIT..............(0x606) : 0xA0E03
------------------------------------------
- Power Units.......................... : 3 (1/8 Watt)
- Energy Status Units.................. : 14 (61 micro-Joules)
- Time Units .......................... : 10 (976.6 micro-Seconds)

MSR_PKG_POWER_LIMIT..............(0x610) : 0x7854000158460
------------------------------------------
- Package Power Limit #1............... : 140 Watt
- Enable Power Limit #1................ : 1 (enabled)
- Package Clamping Limitation #1....... : 1 (allow going below OS-requested P/T state during Time Window for Power Limit #1)
- Time Window for Power Limit #1....... : 10 (2560 milli-Seconds)
- Package Power Limit #2............... : 168 Watt
- Enable Power Limit #2................ : 1 (enabled)
- Package Clamping Limitation #2....... : 1 (allow going below OS-requested P/T state setting Time Window for Power Limit #2)
- Time Window for Power Limit #2....... : 3 (20 milli-Seconds)
- Lock................................. : 0 (MSR not locked)

MSR_PKG_ENERGY_STATUS............(0x611) : 0x592A689
------------------------------------------
- Total Energy Consumed................ : 5706 Joules (Watt = Joules / seconds)

MSR_CONFIG_TDP_NOMINAL...........(0x648) : 0x23
MSR_CONFIG_TDP_LEVEL1............(0x649) : 0xBC000000200460
MSR_CONFIG_TDP_LEVEL2............(0x64a) : 0xBC000000000000
MSR_CONFIG_TDP_CONTROL...........(0x64b) : 0x0
MSR_TURBO_ACTIVATION_RATIO.......(0x64c) : 0x0
MSR_PKGC3_IRTL...................(0x60a) : 0x0
MSR_PKGC6_IRTL...................(0x60b) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C3_RESIDENCY.............(0x3f8) : 0x0
MSR_PKG_C2_RESIDENCY.............(0x60d) : 0x0
MSR_PKG_C6_RESIDENCY.............(0x3f9) : 0x0

IA32_TSC_DEADLINE................(0x6E0) : 0xB687336040

CPU Ratio Info:
------------------------------------------
Base Clock Frequency (BLCK)............. : 100 MHz
Maximum Efficiency Ratio/Frequency.......: 12 (1200 MHz)
Maximum non-Turbo Ratio/Frequency........: 35 (3500 MHz)
Maximum Turbo Ratio/Frequency............: 37 (3700 MHz)
P-State ratio * 100 = Frequency in MHz
------------------------------------------
CPU P-States [ (12) 31 36 ]
CPU C6-Cores [ 0 2 4 6 8 10 ]
CPU P-States [ 12 31 34 (36) ]
CPU C6-Cores [ 0 2 4 6 8 10 11 ]
CPU P-States [ 12 31 34 (35) 36 ]
CPU C6-Cores [ 0 1 2 4 6 8 9 10 11 ]
CPU P-States [ 12 30 31 34 (35) 36 ]
CPU C6-Cores [ 0 1 2 4 5 6 7 8 9 10 11 ]
CPU P-States [ 12 30 31 32 34 (35) 36 ]
CPU P-States [ 12 29 30 31 32 34 35 36 (37) ]
CPU C6-Cores [ 0 1 2 3 4 5 6 7 8 9 10 11 ]
CPU P-States [ 12 18 29 30 31 32 34 35 36 (37) ]
CPU P-States [ (12) 18 27 29 30 31 32 34 35 36 37 ]
CPU P-States [ (12) 18 27 29 30 31 32 33 34 35 36 37 ]
CPU P-States [ (12) 18 25 27 29 30 31 32 33 34 35 36 37 ]
CPU P-States [ (12) 18 23 25 27 29 30 31 32 33 34 35 36 37 ]
CPU P-States [ 12 18 23 24 25 27 29 30 31 32 33 34 35 (36) 37 ]
CPU P-States [ 12 18 22 23 24 25 27 29 30 31 32 33 34 35 36 (37) ]

How can I create a correct ssdtPRGen.sh for my 5930K (I have no overclocking).

Code: 
MSR_PMG_CST_CONFIG_CONTROL.......(0xE2)  : 0x8400
------------------------------------------
- I/O MWAIT Redirection Enable......... : 1 (enabled, IO read of MSR(0xE4) mapped to MWAIT)
- CFG Lock............................. : 1 (MSR locked until next reset)
- C3 State Auto Demotion............... : 0 (disabled/unsupported)
- C1 State Auto Demotion............... : 0 (disabled/unsupported)
- C3 State Undemotion.................. : 0 (disabled/unsupported)
- C1 State Undemotion.................. : 0 (disabled/unsupported)
- Package C-State Auto Demotion........ : 0 (disabled/unsupported)
- Package C-State Undemotion........... : 0 (disabled/unsupported)

How can I unlock (0xE2) MSR locked?

Thank you very much for your help, please.
 
Build 1
ROG MAXIMUS XI HERO (WI-FI) |  i9 9900K |  RX 580 Pulse 8GB
Build 2
RAMPAGE V EXTREME |  i7 5930K |  RX 580 Pulse 8GB
Well I have been reading and reading and have actually got Sierra installed on my x99 Pro USB 3.1 with 5960x, and it was working pretty good besides the 3.0 usb ports. No graphics issues with Zotac Nvidia GTX 1080, but then my mobo decides to not work anymore,,,,it was a huge pain to get working. I truly do not want to go thru it again. So today I am going to go buy a new x99 board, and I was hoping to not have to deal with all the pain that mobo cost me. Are there any other boards that is more compatible with Sierra OS X?

Like the:
Gigabyte GA-X99-Ultra Gaming

Gigabyte GA-X99-Phoenix SLI

Gigabyte GA-X99-Designare EX

any help would be awesome, I am so tired of reading....or should I just sell my i7 5960x and get a whole different chipset and board.....


by the way my mobo bootloops and I can not get into BIOs now. No flash helps or anything....
I get the option to select del or F2 to go in bios but it doesnt, it just loops.


Thank you all for your help and hard work helping eachother, this community is amazing.

 
Hi, great attempt, could u provide some more info about how u generated and patched ur DSDT!
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top