Contribute
Register

Mac OSX 10.12 with X99 Broadwell-E family and Haswell-E family

Status
Not open for further replies.
I haven't gotten a response in my other thread, is it possible to use iBoot Broadwell on a computer running the 6800K CPU/X99 Motherboard? Thank You!

(I plan on Installing Snow Leopard first then going to El Capitan, but get Sierra later this year, it is going to be a stretch but I am not afraid to repeat the process).
 
Its worked 10.11.6 6900K
 

Attachments

  • oFkfcA8.png
    oFkfcA8.png
    87.2 KB · Views: 496
XCPM-High score-DP6

Clover config not test

Its worked patched Kernel for Haswell-E

Remove-FakeCPUID-No

Remove-KernelHaswellE-No

Bios setting

Eiest-Disabled

Remove- NullCPUPowerManagement.kext

Remove- VoodooTSCSync.kext


_xcpm_bootstrap Sierra © Pike R. Alpha

Find 83C3C483FB22

Replace 83C3C183FB22



_xcpm_pkg_scope_msr © Pike R. Alpha

Find BE0700000031D2E894FCFFFF

Replace BE0700000031D29090909090



_xcpm_core_scope_msrs © Pike R. Alpha

Find BE0200000031D2E86CFCFFFF

Replace BE0200000031D29090909090



xcpm performance fix 1 (wrsmr fix to get CPU max) © okrasit

Find 89D8C1E008B99901

Replace B800FF0000B99901



XCPM_idle fix by Pike R. Alpha

Find 20B9E20000000F30

Replace 20B9E20000009090



and use no other clover kernel patches (Asus AICPUPM, KernelPm ....)

Generate your own SSDT for example:
~/ssdtPRGen.sh -b Mac-27ADBB7B4CEE8E61 -turbo 4500 (your OC setting!)
I don't know Clover config not yet.
I try freqVectorsEdit IMac 15.1 for Haswell-E,iMac 16.1 for Broudwell-E

https://pikeralpha.wordpress.com/2016/07/26/xcpm-for-unsupported-processor/


Credits-Pikeralpha
 

Attachments

  • Screen Shot 2016-08-20 at 8.01.00 AM.png
    Screen Shot 2016-08-20 at 8.01.00 AM.png
    380.6 KB · Views: 461
  • Screen Shot 2016-08-19 at 2.54.04 PM.png
    Screen Shot 2016-08-19 at 2.54.04 PM.png
    331.5 KB · Views: 455
  • kernel.zip
    4.2 MB · Views: 195
What do you exactly mean by the word "set".

God I'd love you, if you could do a more detailed step by step guide. When and where to use your different attached files.

I'd also be grateful for a more detailed step-by-step guide. I'm no newbie to the Hackintosh world, but it's been almost 4 years since I built my last Hack, so I'm a little out of the loop here (plus my system pretty much runs with a simple clover/multibeast install). The OP seems to gloss over a few things, assuming that we're all up speed on things (no criticism of the OP though).
 
Haha, there's nothing in this thread that applies to your hardware...

EDIT: You may have updated your hardware, if so change your profile. X99 is unsupported so if you decide to run it get ready for the wrestling match.
 
Yeah, I'm well aware of that. I'm in the market for an upgrade, so keeping an eye on developments. If it's simple enough to do, I'd probably bite the bullet and do it.
 
XCPM-High score-DP6

Clover config not test

Its worked patched Kernel for Haswell-E

Remove-FakeCPUID-No

Remove-KernelHaswellE-No

Bios setting

Eiest-Disabled

Remove- NullCPUPowerManagement.kext

Remove- VoodooTSCSync.kext


_xcpm_bootstrap Sierra © Pike R. Alpha

Find 83C3C483FB22

Replace 83C3C183FB22



_xcpm_pkg_scope_msr © Pike R. Alpha

Find BE0700000031D2E894FCFFFF

Replace BE0700000031D29090909090



_xcpm_core_scope_msrs © Pike R. Alpha

Find BE0200000031D2E86CFCFFFF

Replace BE0200000031D29090909090



xcpm performance fix 1 (wrsmr fix to get CPU max) © okrasit

Find 89D8C1E008B99901

Replace B800FF0000B99901



XCPM_idle fix by Pike R. Alpha

Find 20B9E20000000F30

Replace 20B9E20000009090



and use no other clover kernel patches (Asus AICPUPM, KernelPm ....)

Generate your own SSDT for example:
~/ssdtPRGen.sh -b Mac-27ADBB7B4CEE8E61 -turbo 4500 (your OC setting!)
I don't know Clover config not yet.
I try freqVectorsEdit IMac 15.1 for Haswell-E,iMac 16.1 for Broudwell-E

https://pikeralpha.wordpress.com/2016/07/26/xcpm-for-unsupported-processor/


Credits-Pikeralpha

Hi Nmano, I have a 6800K X99 motherboard, i haven't seen many people getting our combination going (slightly different), but close enough.

In clover configurator is it as easy as erasing the entry for FAKECPUID box in the Kernel and Kext patches section?

I've added a screenshot for you reference if you could help that would be great

I've tried every (i think every i hsould have written it down) combo of OsxAptioFixDrv.efi and test 2.efi

I read on https://nickwoodhams.com/x99-hackintosh-osxaptiofixdrv-allocaterelocblock-error-update/

Notes
If you have the Gigabyte GA-X99P-SLI you may still have problems as the memory map appears to be very wonky on this board.

so that's my board, not sure what's up with it, but doesn't sound good....
 

Attachments

  • Screen Shot 2016-09-03 at 2.50.48 pm.png
    Screen Shot 2016-09-03 at 2.50.48 pm.png
    607.4 KB · Views: 519
Last edited:
Creative sound AppleHDA 10.12 Beta4 (16A270f)
Set LayoutID = 9
With X99 patched and without patched.
which Creative sound card are you using?
 
Status
Not open for further replies.
Back
Top