- Joined
- Apr 5, 2011
- Messages
- 152
- Motherboard
- Gigabyte Designare Z390
- CPU
- i7-9700K
- Graphics
- RX 580
- Mobile Phone
Hi,
I have a
Asus P8P67 B3 3.0 (2303 BIOS modified http://biosrepo.wordpress.com/asus/p67-2/)
2 x G.Skill RipJawsX 8GB (2x4GB) DDR3 1600MHz Dual Channel Kit F3-12800CL9D-8GBXL
Intel Core i5-2500K 3.30GHz (Sandybridge) Socket LGA1155 Processor
XFX Radeon HD 6870 1024MB
Multibeast:
Quick Start > UserDSDT - DSDT_P8P67_patch_20131025.aml
Drivers > Audio > Realtek ALCxxx > Without DSDT > ALC892
Drivers > Audio > Realtek ALCxxx > Without DSDT > HDAEnabler
Drivers > Disk > 3rd Party SATA
Drivers > Disk > TRIM Enabler > 10.9.0 TRIM Patch
Drivers > Misc > FakeSMC v5.3.820
Drivers > Misc > FakeSMC v5.3.820 Plugins
Drivers > Misc > FakeSMC v5.3.820 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal by Zenith432
Drivers > Network > Realtek - Lnx2Mac's RealtekRTL81xx v0.0.90
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v2.2.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > SSDT Options > Sandy Bridge Core i5
Customize > Themes > tonymacx86 Black
Everything went smooth and I am up and running.
However when tried to measure with geekbench (32-bit) I get a multicore measurement
of ~ 4800! In mountain lion I was getting more than 10000 .
Any idea on how to start debugging it?
Thanks!!!!
I have a
Asus P8P67 B3 3.0 (2303 BIOS modified http://biosrepo.wordpress.com/asus/p67-2/)
2 x G.Skill RipJawsX 8GB (2x4GB) DDR3 1600MHz Dual Channel Kit F3-12800CL9D-8GBXL
Intel Core i5-2500K 3.30GHz (Sandybridge) Socket LGA1155 Processor
XFX Radeon HD 6870 1024MB
Multibeast:
Quick Start > UserDSDT - DSDT_P8P67_patch_20131025.aml
Drivers > Audio > Realtek ALCxxx > Without DSDT > ALC892
Drivers > Audio > Realtek ALCxxx > Without DSDT > HDAEnabler
Drivers > Disk > 3rd Party SATA
Drivers > Disk > TRIM Enabler > 10.9.0 TRIM Patch
Drivers > Misc > FakeSMC v5.3.820
Drivers > Misc > FakeSMC v5.3.820 Plugins
Drivers > Misc > FakeSMC v5.3.820 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal by Zenith432
Drivers > Network > Realtek - Lnx2Mac's RealtekRTL81xx v0.0.90
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v2.2.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > SSDT Options > Sandy Bridge Core i5
Customize > Themes > tonymacx86 Black
Everything went smooth and I am up and running.
However when tried to measure with geekbench (32-bit) I get a multicore measurement
of ~ 4800! In mountain lion I was getting more than 10000 .
Any idea on how to start debugging it?
Thanks!!!!