Lenovo v310-15isk mac os sierra

[hr17]

hi there,
i am trying to boot mac os sierra using clover and right now i am stuck , dont know reason.Laptop configuration is i3-6100u 4gb ram (ddr4 2100 mhz) , native resolution 1366*768 ,synaptics trackpad, Qualcomm Atheros QCA9377 Wireless Network Adapter,lenovo motherbard (model 80sy) .i have chaged conig.plist resolution to 1366*768 and i am currently following
https://googleweblight.com/i?u=http...aller-on-laptops-with-clover.148093/&hl=en-IN

 

[RehabMan]

hi there,
i am trying to boot mac os sierra using clover and right now i am stuck , dont know reason.Laptop configuration is i3-6100u 4gb ram (ddr4 2100 mhz) , native resolution 1366*768 ,synaptics trackpad, Qualcomm Atheros QCA9377 Wireless Network Adapter,lenovo motherbard (model 80sy) .i have chaged conig.plist resolution to 1366*768 and i am currently following
https://googleweblight.com/i?u=http...aller-on-laptops-with-clover.148093/&hl=en-IN

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[hr17]

followed through your guide and uefi partition size was 100 mb, increased it to 1000mb and dvmt pre alloc is 128mb. dont know about sata controller though. still stuck . should i delete fakesmc.kext . help would be appreciated.

 

[Feartech]

followed through your guide and uefi partition size was 100 mb, increased it to 1000mb and dvmt pre alloc is 128mb. dont know about sata controller though. still stuck . should i delete fakesmc.kext . help would be appreciated.

efi only needs to be around 200mb

 

[hr17]

efi only needs to be around 200mb

is it a problem ? beacuse i have read that efi partition should be greater than 200 mb.

 

[RehabMan]

followed through your guide and uefi partition size was 100 mb, increased it to 1000mb and dvmt pre alloc is 128mb. dont know about sata controller though. still stuck . should i delete fakesmc.kext . help would be appreciated.

How do you know DVMT-prealloc is 128mb? (Windows is not a valid way to check...)
The kexts you have in Clover/kexts/Other are not those recommended in the guide.
Your config.plist is not from the guide.

 

[hr17]

i checked dvmt-prealloc in windows ,i dont know another way . please suggest if any .
1)should i delete vboxhfs.efi in drivers64uefi ?
2)what to do with clover/kexts/other
3)i used config.plist for hd520 but due to it laptop reboots after exitng from verbmose mode

 

[RehabMan]

i checked dvmt-prealloc in windows ,i dont know another way . please suggest if any .

It is not a valid method.
As per FAQ...

IMPORTANT!: Contrary to many of the guides you will read, Windows is NOT a valid way to determine what DVMT-prealloc is set to. There is no correlation, especially with Windows 10.

1)should i delete vboxhfs.efi in drivers64uefi ?

My plists disable it. Does not matter.

2)what to do with clover/kexts/other

Should be as per guide.

3)i used config.plist for hd520 but due to it laptop reboots after exitng from verbmose mode

No idea without "Problem Reporting" files.
Likely due to panic because of incorrectly set DVMT-prealloc.
Must use invalid ig-platform-id (as per guide) until you can properly get the kexts in kernel cache so they can be patched.

 

[hr17]

now i used config for hd520 graphics , fakesmc and other stuff from the guide only .Please cross check .

 

[Feartech]

now i used config for hd520 graphics , fakesmc and other stuff from the guide only .Please cross check .

as per guide:
use OsxAptioFixDrv-64