Lenovo Ideapad Y560 - 95% Sierra working - How to save and re-use the DSDT and Plist?

[Walid]

I am extremely new to the Hackintosh world, but after one week of reading, try and error, hundreds of restarts, and tens of crashes, I have finally made my ancient Ideapad Y560 work and it is unexpectedly fast.
I need help with the remaining not working parts and please a guide on how to store the working DSDT, Plist, and Kexts and re-use them with new installation or upgrading to High Sierra.
I did my best in reading, but still, I can't figure out how to save and re-use those, everyone is always speaking about patching.

What's Working:
-Bluetooth
-Wifi
-Ethernet
-Audio
-USBs
-Camera
-Trackpad & Keyboard (Synaptics)
-Sleep and shutdown (restart don't work)

What's not working
-Main display - I guess because of the low resolution, I use the HDMI port and I get FHD output.
-Battery indicator
-Restart (after booting it goes black, I have to force shutdown and power again)

Specifications:
Motherboard Name: Lenovo KL3
Motherboard Chipset: Intel Ibex Peak-M HM55, Intel Clarksfield
BIOS Type: Phoenix (07/23/10)
Intel® Core™ i7 720QM processor (1.60GHz, 6MB Cache)
4GB DDR3 RAM (Changed to 8GB)
640GB HDD 7200 rpm (Changed to 250 SSD)
DVD+/-RW Double Layer drive
15.6'' diagonal HD LED backlight display (1366 x 768 pixels )
ATI Mobility Radeon™ HD 5730 GMA with Dedicated 1 GB VRM
Intel Onboard Graphics
Audio Adapter: Realtek ALC272 @ Intel Ibex Peak PCH - High Definition Audio Controller
Webcam - Camera JMicron
WiFi - Atheros
Bluetooth - Broadcom
Ethernet - Broadcom NetLink Gigabit Ethernet adapter.
Touch Pad
6-cell Lithium Ion battery

 

[Feartech]

I am extremely new to the Hackintosh world, but after one week of reading, try and error, hundreds of restarts, and tens of crashes, I have finally made my ancient Ideapad Y560 work and it is unexpectedly fast.
I need help with the remaining not working parts and please a guide on how to store the working DSDT, Plist, and Kexts and re-use them with new installation or upgrading to High Sierra.
I did my best in reading, but still, I can't figure out how to save and re-use those, everyone is always speaking about patching.

What's Working:
-Bluetooth
-Wifi
-Ethernet
-Audio
-USBs
-Camera
-Trackpad & Keyboard (Synaptics)
-Sleep and shutdown (restart don't work)

What's not working
-Main display - I guess because of the low resolution, I use the HDMI port and I get FHD output.
-Battery indicator
-Restart (after booting it goes black, I have to force shutdown and power again)

Specifications:
Motherboard Name: Lenovo KL3
Motherboard Chipset: Intel Ibex Peak-M HM55, Intel Clarksfield
BIOS Type: Phoenix (07/23/10)
Intel® Core™ i7 720QM processor (1.60GHz, 6MB Cache)
4GB DDR3 RAM (Changed to 8GB)
640GB HDD 7200 rpm (Changed to 250 SSD)
DVD+/-RW Double Layer drive
15.6'' diagonal HD LED backlight display (1366 x 768 pixels )
ATI Mobility Radeon™ HD 5730 GMA with Dedicated 1 GB VRM
Intel Onboard Graphics
Audio Adapter: Realtek ALC272 @ Intel Ibex Peak PCH - High Definition Audio Controller
Webcam - Camera JMicron
WiFi - Atheros
Bluetooth - Broadcom
Ethernet - Broadcom NetLink Gigabit Ethernet adapter.
Touch Pad
6-cell Lithium Ion battery

please read the faq for proper hardware profile setup:

[FAQ] READ FIRST! Laptop Frequent Questions

This is an updated FAQ from the Original Thread: https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/post-1045259 Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum...

www.tonymacx86.com