Lenovo IdeaPad U310

[ikkoku]

Hi ikkoku

What/How do you put efi injection? Where do you get it?
I can only boot with HDMI connected.

Regards.

put

<key>device-properties</key> <string>7f0000000100000001000000730000000200000002 010c00d041030a000000000101060000027fff04002c000000 4100410050004c002c00690067002d0070006c006100740066 006f0072006d002d0069006400000008000000030066011400 00006800640061002d0067006600780000000d0000006f6e62 6f6172642d31</string>

into your org.chameleon.Boot.plist
or you can use Chameleon wizard

 

[RehabMan]

put

<key>device-properties</key> <string>7f0000000100000001000000730000000200000002 010c00d041030a000000000101060000027fff04002c000000 4100410050004c002c00690067002d0070006c006100740066 006f0072006d002d0069006400000008000000030066011400 00006800640061002d0067006600780000000d0000006f6e62 6f6172642d31</string>

into your org.chameleon.Boot.plist
or you can use Chameleon wizard

FYI: This device-properties EFI string is the same as applying patch to DSDT:

into method label _DSM parent_adr 0x00020000 remove_entry;
into device name_adr 0x00020000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
    Return (Package()\n
    {\n
        "hda-gfx",\n 
        Buffer (0x0A) { "onboard-1" },\n
        "AAPL,ig-platform-id",\n
        Buffer (0x04) { 0x03, 0x00, 0x66, 0x01 },\n
    })\n
}\n
end;

I prefer the DSDT patch because you can tell what it does by looking at it, and sometimes you need to make changes/additions to the _DSM for injecting other properties (common one in this case is if you have HD4000 w/ high-res display, and therefore need AAPL00,DualLink inject.

 

[clutchplate]

FYI: This device-properties EFI string is the same as applying patch to DSDT:

into method label _DSM parent_adr 0x00020000 remove_entry;
into device name_adr 0x00020000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
    Return (Package()\n
    {\n
        "hda-gfx",\n 
        Buffer (0x0A) { "onboard-1" },\n
        "AAPL,ig-platform-id",\n
        Buffer (0x04) { 0x03, 0x00, 0x66, 0x01 },\n
    })\n
}\n
end;

I prefer the DSDT patch because you can tell what it does by looking at it, and sometimes you need to make changes/additions to the _DSM for injecting other properties (common one in this case is if you have HD4000 w/ high-res display, and therefore need AAPL00,DualLink inject.

Hi Ikkoko, RehabMan.

Thank you very much for your responses.

I did not have a DSDT to start with and used the multibeast method "User DSDT or DSDT free"
How do I patch DSDT if I never had one, or is it created when I install Multibeast?
The system install perfectly, except LAN and wireless. USB works, webcam, sound works OTB.
Graphics also but only through the HDMI port.

I tried to extract with 2 different DSDT editors but with both of them it picked up errors when compiling and then after reboot the intrnal still did't work and the image on the HDMI monitor turned to garbage.
I have tried 6 times now, so obviously I am doing it wrong.

Starting over now.

I have dual boot with Windows 8 and no problems there.
I have built about 10 Hackintoshes over the last couple of years, but always managed with the hardware.
Problem is now I can't change the hardware.

Regards.

 

[clutchplate]

FYI: This device-properties EFI string is the same as applying patch to DSDT:

into method label _DSM parent_adr 0x00020000 remove_entry;
into device name_adr 0x00020000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
    Return (Package()\n
    {\n
        "hda-gfx",\n 
        Buffer (0x0A) { "onboard-1" },\n
        "AAPL,ig-platform-id",\n
        Buffer (0x04) { 0x03, 0x00, 0x66, 0x01 },\n
    })\n
}\n
end;

I prefer the DSDT patch because you can tell what it does by looking at it, and sometimes you need to make changes/additions to the _DSM for injecting other properties (common one in this case is if you have HD4000 w/ high-res display, and therefore need AAPL00,DualLink inject.

Hi Rehabman, ikkoku.

Thank you for the responses.

I never had a DSDT to start with, I used the Multobeast install with "user DSDT or DSDT free installation"

I i try to extract DSDT with an Editor I am not sure where it is getting it from or where the patch is saved.
Not sure I am doing anything right at the moment.
After trying to patch DSDT I see garbage on the HDMI screen and the internal monitor goes off.
I have tried a few times now, so I am obviously messing it up somehow.

Re-installing now again.

Regards.

 

[ikkoku]

FYI: This device-properties EFI string is the same as applying patch to DSDT:

into method label _DSM parent_adr 0x00020000 remove_entry;
into device name_adr 0x00020000 insert
begin
Method (_DSM, 4, NotSerialized)\n
{\n
    If (LEqual (Arg2, Zero)) { Return (Buffer() { 0x03 } ) }\n
    Return (Package()\n
    {\n
        "hda-gfx",\n 
        Buffer (0x0A) { "onboard-1" },\n
        "AAPL,ig-platform-id",\n
        Buffer (0x04) { 0x03, 0x00, 0x66, 0x01 },\n
    })\n
}\n
end;

I prefer the DSDT patch because you can tell what it does by looking at it, and sometimes you need to make changes/additions to the _DSM for injecting other properties (common one in this case is if you have HD4000 w/ high-res display, and therefore need AAPL00,DualLink inject.

cool. I have to try this

 

[RehabMan]

cool. I have to try this

If you want to know how to decode the device-properties string, see my post here: http://www.tonymacx86.com/hp-proboo...lling-snow-leopard-hp-probook.html#post577828

 

[Axymis]

Hello,

I have the U410, but the trackpad doesn't work (physical click won't work). You said that the trackpad works in the U310! Do the buttons work too? If they do, then I'll probably return the U410, buy the U310, and upgrade the RAM. If I can fix my trackpad, then I'll stick to the U410.

Thank you,
HTM

 

[RehabMan]

Hello,

I have the U410, but the trackpad doesn't work (physical click won't work). You said that the trackpad works in the U310! Do the buttons work too? If they do, then I'll probably return the U410, buy the U310, and upgrade the RAM. If I can fix my trackpad, then I'll stick to the U410.

Thank you,
HTM

If you have the Synaptics trackpad on your U410, you can definitely get it working quite well using my driver.

 

[Axymis]

Thank you RehabMan,

I reinstalled Mac OS X for a fifth time, and instead of using the Multibeast 5.3.1 PS2 Driver, I used the Multibeast 5.2.1 PS2 Driver. Now the laptop recognizes the trackpad as a mouse, so I don't know how to get scrolling working... Any ideas?

-HTM

 

[RehabMan]

Thank you RehabMan,

I reinstalled Mac OS X for a fifth time, and instead of using the Multibeast 5.3.1 PS2 Driver, I used the Multibeast 5.2.1 PS2 Driver. Now the laptop recognizes the trackpad as a mouse, so I don't know how to get scrolling working... Any ideas?

-HTM

You didn't answer my previous question...

What trackpad do you have in your laptop? Is it Synaptics?
If so, you should install my driver: https://github.com/RehabMan/OS-X-Voodoo-PS2-Controller

Make sure to read all installation instructions carefully and follow them.