Contribute
Register

Lenovo B570e OS X 10.8.5

Status
Not open for further replies.
Joined
Feb 28, 2014
Messages
15
Motherboard
Lenovo B570e
CPU
2.19 Gz Intel Core i3/ Intel 6 Series Chipset
Graphics
Intel HD Graphics 3000 512MB, 1366x769
Mac
  1. MacBook Pro
Classic Mac
  1. 0
Mobile Phone
  1. Android
I've installed Mountain Lion 10.8.5 on my Lenovo B570e using Unibeast.
So far, so good. Now some difficulties have shown up.
I'm not quite sure how to fulfill my installation with MultiBeast.
At this moment I can only startup my Mac while my UniBeast USB is plugged in.
Also, none of the following is working: webcam, wifi, audio

This is the first time I install a Hackintosh. I have no experience with Mac at all.

Some advices would be a big help to me.
 
I've installed Mountain Lion 10.8.5 on my Lenovo B570e using Unibeast.
So far, so good. Now some difficulties have shown up.
I'm not quite sure how to fulfill my installation with MultiBeast.
At this moment I can only startup my Mac while my UniBeast USB is plugged in.
Also, none of the following is working: webcam, wifi, audio

This is the first time I install a Hackintosh. I have no experience with Mac at all.

Some advices would be a big help to me.

Please provide complete details in your profile.

System: manufacturer/model
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx). For a laptop, these details are important and affect critical installation procedures.
 
Done! Hopefully someone can help me now.
 
Done! Hopefully someone can help me now.

Chipset is not specified. It is important. Please read post #2 carefully.
 
Now it is!
 
I've installed Mountain Lion 10.8.5 on my Lenovo B570e using Unibeast.
So far, so good. Now some difficulties have shown up.
I'm not quite sure how to fulfill my installation with MultiBeast.
At this moment I can only startup my Mac while my UniBeast USB is plugged in.
Also, none of the following is working: webcam, wifi, audio

This is the first time I install a Hackintosh. I have no experience with Mac at all.

Some advices would be a big help to me.

For booting from HDD and power management, see: http://www.tonymacx86.com/mountain-...nagement-sandy-bridge-ivy-bridge-laptops.html

Webcams are usually on the USB bus. Check for your USB ports working and check to see if the camera is in System Information (under USB).


Audio: Best result with patched AppleHDA. Google 'patch AppleHDA guide'. Search for suitable AppleHDA or patch it yourself. Apply appropriate DSDT patches.

WiFi: Depends on having compatible hardware. Use DPCIManager->PCI List to find out what you have. Compatible chipsets and the procedures for making them work are covered here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html
 
20140308_110227[1].jpg

I used MultiBeast, the first time I boot afterwards I get this message.
 
I did everything as listed in post #1.
 
Status
Not open for further replies.
Back
Top