- Joined
- Jan 20, 2019
- Messages
- 30
- Motherboard
- XPS 13 9343-Clover
- CPU
- i7-5500U
- Graphics
- HD 5500 (3200x1800)
Hi guys,
I have the xps 13 9343 - i7-5500U + HD Graphics 5500.
I have already done a fresh mojave installation with 3 diff configuration (one with Rehabman config following the well known guide, one taken from the XPS 13 thread from this site, and the last one from https://github.com/haos001/XPS13-9343-Clover -with my same specs, and all working smooth for them-).
Its been a month trying loads of different things, but cant get it working properly, I am really about to give up... but maybe I can get a couple of suggestion from the community first...
The installation goes fine, sometimes its a bit laggy during the installation as well, but then, when the installation is complete, after installing clover on the hhd, installing all kexts, etc, its soooo laggy and unresponsive... it takes about 7 mins to boot!! In the meanwhile, I installed w10 as dual boot to check that the hardware if fine, and it boots in 15 secs... all working fine, so it must be something on my set up, but cant find out what...also, cant get the wifi to work at all, its there, but does not turn on.
I am BIOS A07 as suggested on https://www.tonymacx86.com/threads/guide-dell-xps-13-9343-sierra.206399/ (downgraded from A18 in order to sort out the prealloc dvmt thing..) .
I am attaching the debug as per https://www.tonymacx86.com/threads/tool-generate-proper-problem-reporting-files.235953/
my system specs:
XPS 13 9343 - i7-5500U - 8GB ram - SSD Liteon 512GB - HD 5500 - Dell Wireless 1560 - QHD screen
I really appreciate any help/suggestions
Regards,
Mati
I have the xps 13 9343 - i7-5500U + HD Graphics 5500.
I have already done a fresh mojave installation with 3 diff configuration (one with Rehabman config following the well known guide, one taken from the XPS 13 thread from this site, and the last one from https://github.com/haos001/XPS13-9343-Clover -with my same specs, and all working smooth for them-).
Its been a month trying loads of different things, but cant get it working properly, I am really about to give up... but maybe I can get a couple of suggestion from the community first...
The installation goes fine, sometimes its a bit laggy during the installation as well, but then, when the installation is complete, after installing clover on the hhd, installing all kexts, etc, its soooo laggy and unresponsive... it takes about 7 mins to boot!! In the meanwhile, I installed w10 as dual boot to check that the hardware if fine, and it boots in 15 secs... all working fine, so it must be something on my set up, but cant find out what...also, cant get the wifi to work at all, its there, but does not turn on.
I am BIOS A07 as suggested on https://www.tonymacx86.com/threads/guide-dell-xps-13-9343-sierra.206399/ (downgraded from A18 in order to sort out the prealloc dvmt thing..) .
I am attaching the debug as per https://www.tonymacx86.com/threads/tool-generate-proper-problem-reporting-files.235953/
my system specs:
XPS 13 9343 - i7-5500U - 8GB ram - SSD Liteon 512GB - HD 5500 - Dell Wireless 1560 - QHD screen
I really appreciate any help/suggestions
Regards,
Mati