- Joined
- Jun 26, 2011
- Messages
- 51
- Motherboard
- Gigabyte GA-Z68XP-UD3
- CPU
- i7 2600K
- Graphics
- HIS Radeon HD 6870
- Mac
- Classic Mac
- Mobile Phone
I am posting from my ML installation which is working very well for me at the moment - as long as I boot from my other hard drive that has Lion on it.
I did a fresh install to a brand new SSD (firmware up to date and trim enabler selected from multi beast.) I installed chameleon from MultiBeast 5.0.2 onto the SSD and I used the same SSDT/DSDT as from my Lion installation. When I boot from the SSD I get about 5 minutes before there is a kernel panic. I checked the org.chameleon.Boot.plist and it is the same aside from order and my Lion install specifies 1920x1080x32 for video setting. When booting into ML from the HDD does it use the SSDT, DSDT, and boot.plist from the Lion folder, or does it look in the ML install? I don't know what the issue could be. Any help would be appreciated.
Thanks
I did a fresh install to a brand new SSD (firmware up to date and trim enabler selected from multi beast.) I installed chameleon from MultiBeast 5.0.2 onto the SSD and I used the same SSDT/DSDT as from my Lion installation. When I boot from the SSD I get about 5 minutes before there is a kernel panic. I checked the org.chameleon.Boot.plist and it is the same aside from order and my Lion install specifies 1920x1080x32 for video setting. When booting into ML from the HDD does it use the SSDT, DSDT, and boot.plist from the Lion folder, or does it look in the ML install? I don't know what the issue could be. Any help would be appreciated.
Thanks