- Joined
- Aug 18, 2015
- Messages
- 7
- Mac
- Classic Mac
- Mobile Phone
Hello,
so this is my first Hackintosh ever, and i ran into so many problems that i was right about to say: "F*** it i just install Windows 10 and everything is fine."
But after one night of sleep i retried and found the right guides and answers to my problems.
So I got this following Build to work:
Gigabyte Z97X UD5H
Intel Core i7 4790k
32 GB HyperX DDR3 RAM
2x 250 GB Samsung Evo 850 SSD
1x 2TB Seagate Desktop HDD
600Watt Be Quiet PSU
and a lot of stuff for the water cooling.
CASE: Thermaltake Core P5
These are the Threads that helped me a LOT:
http://www.tonymacx86.com/user-buil...tx-980-512gb-m-2-10gbe-dual-4k-10-11-1-a.html
http://www.tonymacx86.com/el-capita...l-capitan-install-problems.html#CategoryModel
And ofc the classic Clover-El Capitan Guide on the Main Page.
USB 3.0 Works
Audio Works
Network (Atheros Killer) works
GTX 980 works
Got the Sensors running with some Kexts and HW Monitor
even iMessage seems to work out of the box
NOW here are my questions i have.
I Always kept running in the same error. Booting stopped at "Missing Bluetooth Controller Transport"
When i booted from the USB-Stick it worked, so i backuped the working EFI from my USB to my Desktop and copied it to my Clover EFI on the Hard Drive. Now i had a System that was bootable again.
From this point i went step by step, to see at what point everything Breaks. Audio Update worked, Nvidia Web Drivers worked, everything was good - until i tried to configure my SMBIOS and say, change it to MacPro 3,1.
I tried iMac with my same CPU, i tried the MacPro 3,1 everything got me running in the same failure (Bluetooth missing).
Now my config has no SMBIOS, its all empty.
Can or will this be a problem at any point?
Also id like to know, will i be able to install updates for say iTunes and RAW from the App Store without breaking my System? What can i do to turn back to my working system if something crashes?
I Have a second SSD already formated for Windows. Can i just install windows on it and than see and select it at the clover bootloader or is there something more i have to know?
Greets and Thanks in advance,
Niki
PS: I hope you like my build
so this is my first Hackintosh ever, and i ran into so many problems that i was right about to say: "F*** it i just install Windows 10 and everything is fine."
But after one night of sleep i retried and found the right guides and answers to my problems.
So I got this following Build to work:
Gigabyte Z97X UD5H
Intel Core i7 4790k
32 GB HyperX DDR3 RAM
2x 250 GB Samsung Evo 850 SSD
1x 2TB Seagate Desktop HDD
600Watt Be Quiet PSU
and a lot of stuff for the water cooling.
CASE: Thermaltake Core P5
These are the Threads that helped me a LOT:
http://www.tonymacx86.com/user-buil...tx-980-512gb-m-2-10gbe-dual-4k-10-11-1-a.html
http://www.tonymacx86.com/el-capita...l-capitan-install-problems.html#CategoryModel
And ofc the classic Clover-El Capitan Guide on the Main Page.
USB 3.0 Works
Audio Works
Network (Atheros Killer) works
GTX 980 works
Got the Sensors running with some Kexts and HW Monitor
even iMessage seems to work out of the box
NOW here are my questions i have.
I Always kept running in the same error. Booting stopped at "Missing Bluetooth Controller Transport"
When i booted from the USB-Stick it worked, so i backuped the working EFI from my USB to my Desktop and copied it to my Clover EFI on the Hard Drive. Now i had a System that was bootable again.
From this point i went step by step, to see at what point everything Breaks. Audio Update worked, Nvidia Web Drivers worked, everything was good - until i tried to configure my SMBIOS and say, change it to MacPro 3,1.
I tried iMac with my same CPU, i tried the MacPro 3,1 everything got me running in the same failure (Bluetooth missing).
Now my config has no SMBIOS, its all empty.
Can or will this be a problem at any point?
Also id like to know, will i be able to install updates for say iTunes and RAW from the App Store without breaking my System? What can i do to turn back to my working system if something crashes?
I Have a second SSD already formated for Windows. Can i just install windows on it and than see and select it at the clover bootloader or is there something more i have to know?
Greets and Thanks in advance,
Niki
PS: I hope you like my build