Kext For Intel SATA Controller in RAID Mode

[elastik]

Ok I will try that tomorow, when I'm at the office.
The Sata controller hast to be in AHCI mode and not in RAID is that right?
Is there a HardDrive limitation to 3 Drives to crate a Raid with the DiskUtility or can I use all 6 Drives?

Thanks for your help

 

[BreBo]

The Sata controller has to be in AHCI mode and not in RAID is that right?

Correct

Is there a HardDrive limitation to 3 Drives to crate a Raid with the DiskUtility or can I use all 6 Drives?

TBH I don't know.

 

[elastik]

Yes it worked fine, thank you!!

 

[Vyzantion]

@RehabMan
I seem to have a similar problem to this. On my hardware Sierra and High Sierra worked vanilla, and Mojave also worked with some tweaks to work with an old GPU. Now, the Catalina installer does not see the internal hard-drives, neither the main, SATA one, where macOS is usually installed, and neither the secondary one, on ATA. AHCI is not an option in the firmware to change, and previous three macOS editions worked without an issue on it, so this motherboard board seems to be AHCI only anyway. This is the first the macOS installer does not see the internal hard-drives at all. Do I need to add some kexts into Clover? What about the new EC patch, could it have something to do with this?

 

[trs96]

could it have something to do with this?

Rehabman has not been active here since last April.

 

[Vyzantion]

Rehabman has not been active here since last April.

On the post or on the board as a whole?