Kernel Panic during installation

[Morleyrigged]

Hey,

Im attempting to install clover, I read the EFI settings recommended and went through each. I've tested all my USB3 and 2 ports and tried alternative flash drives but I'm hun at loading the setup. I have tried setting NVIDIA injection to <true/> by editing the XML file (see attached).

I'm getting sporadic errors.

Sometimes its this can't allocate Runtime error:

Other it looks like it load but get's too PCI configuration then the system restarts with no error or prompt.

Specs:
CPU: Intel Core i7-5820K
Board: ASUS X99-AII
GPU: Gigabyte Geforce GTX 980 ti
16 GB Kingston Fury Ram

Anyone have some advise on where to go next for troubleshooting?

Update: Here is my current install log & I did manage to get past the above error (PCI config) but now I have a new error:

 

[Morleyrigged]

Sorry meant to include my log file!

Hey,

Im attempting to install clover, I read the EFI settings recommended and went through each. I've tested all my USB3 and 2 ports and tried alternative flash drives but I'm hun at loading the setup. I have tried setting NVIDIA injection to <true/> by editing the XML file (see attached).

I'm getting sporadic errors.

Sometimes its this can't allocate Runtime error:

Other it looks like it load but get's too PCI configuration then the system restarts with no error or prompt.

Specs:
CPU: Intel Core i7-5820K
Board: ASUS X99-AII
GPU: Gigabyte Geforce GTX 980 ti

Anyone have some advise on where to go next for troubleshooting?

 

[Morleyrigged]

Update 2:

I'm a tad closer but now I think I'm getting kernel panics?

This time all I did was use npci=0x3000 boot flag -

Hey,

Im attempting to install clover, I read the EFI settings recommended and went through each. I've tested all my USB3 and 2 ports and tried alternative flash drives but I'm hun at loading the setup. I have tried setting NVIDIA injection to <true/> by editing the XML file (see attached).

I'm getting sporadic errors.

Sometimes its this can't allocate Runtime error:

Other it looks like it load but get's too PCI configuration then the system restarts with no error or prompt.

Specs:
CPU: Intel Core i7-5820K
Board: ASUS X99-AII
GPU: Gigabyte Geforce GTX 980 ti
16 GB Kingston Fury Ram

Anyone have some advise on where to go next for troubleshooting?


Update: Here is my current install log & I did manage to get past the above error (PCI config) but now I have a new error:

 

[Morleyrigged]

In case it helps this is my hardware profile, I'm still stuck, I've definitely tried all the boot arguments =(

Hey,

Im attempting to install clover, I read the EFI settings recommended and went through each. I've tested all my USB3 and 2 ports and tried alternative flash drives but I'm hun at loading the setup. I have tried setting NVIDIA injection to <true/> by editing the XML file (see attached).

I'm getting sporadic errors.

Sometimes its this can't allocate Runtime error:

Other it looks like it load but get's too PCI configuration then the system restarts with no error or prompt.

Specs:
CPU: Intel Core i7-5820K
Board: ASUS X99-AII
GPU: Gigabyte Geforce GTX 980 ti
16 GB Kingston Fury Ram

Anyone have some advise on where to go next for troubleshooting?

Update: Here is my current install log & I did manage to get past the above error (PCI config) but now I have a new error: