Kernel panic and reboot while installing Sierra (G4500/H110)

[sparks.ru]

Hello.)) I am trying to install Sierra and have a kernel panic and permanent reboot.

There is my config:

• Intel Pentium G4500 Skylake 1151
• Intel HD 530 onboard video card (using DVI)
  
• Asus H110M-R with latest bios
• Kingston 8Gb DDR4
• SmartBuy SSD 128 GB
• Realtek ALC887
• Latest MultiBeast and UniBeast
• Latest Clover

Log clip:
pid 1 exited -- exit reason namespace 2 subcode 0x4, description none

Solution: because Pentium G Skylake natively not used in Mac's we need to add FakeCPUID or will be kernel panic.

• Download and run Clover Configurator http://mackie100projects.altervista.org/download-clover-configurator/.
• Go to Mount EFI tab and mount your EFI partition.
• Tab on Home icon on bottom and load your config.plst from EFI partition (/EFI/Clover/config.plst).
• Tab on Kernel and Text patches and add FakeCPUID 0x0306A0
• Save and reboot.

 

[BreBo]

Your CPU is not natively supported, use FakeCPUID in Clover.

https://www.tonymacx86.com/search/1213780/?q=G4500&o=date

 

[sparks.ru]

Thank you. Adding FakeCPUID into config.plst was fixed the problem.
I installed Sierra and booted up from HDD, however Sierra can't load video kext, no acceleration, only 7 mb of video ram and no audio as well.

Used this solution https://www.tonymacx86.com/threads/fix-skylake-menu-bar-glitch-fix.206400/
and http://osxpc.ru/zavod/gpu/intel/skylake/. Unfortunately still no luck.

[IGPU] Graphics driver failed to load: could not register with Framebuffer driver

 

[sparks.ru]

After several tries still no luck with video and audio
Clover 3922, Sierra 10.12.1 with updates, HD 530 0x19120000 and DVI-D port, video memory 128 mb in BIOS.
Many people says they video works out of box. Ohhhh, this is my story.

Step 1: Clean MultiBeast setup, inject Intel, ig-platform-id 0x12190000 and KextToPatch from MultiBeast 9.
Result: normal boot, no acceleration, 7 mb vram, glitches.
Error: [IGPU] Graphics driver failed to load: could not register with Framebuffer driver.

Step 2: Clean MultiBeast setup, inject Intel, ig-platform-id 0x19120000 and KextToPatch from MultiBeast 9.
I see 0x19120000 in many examples and plists but have no idea why it is causes exception?
Cut from MultiBeast manual: In Adds ig-platform-id=0x19120000 to config.plist
Result: no boot, exception.
Error: [IGPU] Failed to initialize graphics firmware. Falling back to host-side scheduling.
AMFI: allowing exception handler for 'WindowServer' because the handler was set by master-entitled process 'launchid'

Step 3: without inject Intel, ig-platform-id and KextToPatch are empty, use Arbitrary to inject by
this method http://osxpc.ru/zavod/gpu/intel/skylake/
Result: normal boot, no acceleration, 7 mb vram, glitches.
Error: [IGPU] Graphics driver failed to load: could not register with Framebuffer driver.


Any idea?

 

[Gigamaxx]

After several tries still no luck with video and audio
Clover 3922, Sierra 10.12.1 with updates, HD 530 0x19120000 and DVI-D port, video memory 128 mb in BIOS.
Many people says they video works out of box. Ohhhh, this is my story.

Step 1: Clean MultiBeast setup, inject Intel, ig-platform-id 0x12190000 and KextToPatch from MultiBeast 9.
Result: normal boot, no acceleration, 7 mb vram, glitches.
Error: [IGPU] Graphics driver failed to load: could not register with Framebuffer driver.

Step 2: Clean MultiBeast setup, inject Intel, ig-platform-id 0x19120000 and KextToPatch from MultiBeast 9.
I see 0x19120000 in many examples and plists but have no idea why it is causes exception?
Cut from MultiBeast manual: In Adds ig-platform-id=0x19120000 to config.plist
Result: no boot, exception.
Error: [IGPU] Failed to initialize graphics firmware. Falling back to host-side scheduling.
AMFI: allowing exception handler for 'WindowServer' because the handler was set by master-entitled process 'launchid'

Step 3: without inject Intel, ig-platform-id and KextToPatch are empty, use Arbitrary to inject by
this method http://osxpc.ru/zavod/gpu/intel/skylake/
Result: normal boot, no acceleration, 7 mb vram, glitches.
Error: [IGPU] Graphics driver failed to load: could not register with Framebuffer driver.

Any idea?

Your graphics are actually HD 520 I believe.

Check this out!