Modding is a little slow at the moment. The big jobs have been done, so i'm slowly reassembling.
I've installed a few blue led-strips. Just some cheap Chinese strips with a simple molex-connector. I've connected 'em together to a switch, because i don't want the leds on all the time. When the case is properly grounded the switch lights on.
[video=youtube;cXbQ34si40M]https://www.youtube.com/watch?v=cXbQ34si40M[/video]
I already re-installed the front-panel-pcb with the new cable, an internal usb-hub for bluetooth, the rear-fan-assembly with two 92mm Noctua's, a custom bracket for the hdd-led and the Kraken X61 rad, with the stock coolers. I'm wondering if i should switch them for Noctuas, it will look better. On the other hand, if you're just looking at the case only the black sides are visible.
I've removed the pre-applied thermal compound of the waterpump with Arcticlean. I'll use Arctic Silver 5.
Next up is choosing and mounting a motherboard. I'm also looking a the endless options for Ram. I can't decide whether to take 4x8 Gb's or an more expensive but easy upgradable 2x16 Gb's.
I've choosen the CPU already, it's going to be the i7 6700K. It's just not widely available here in Holland/Europe. Prices are rising because of shortage,
from €389 to €470 to €500, which is way too much. I'm gonna wait till Intel ramps up production and prices will drop a bit.