- Joined
- Jan 27, 2019
- Messages
- 22
- Motherboard
- Gigabyte Aorus Master Z390
- CPU
- i9-9900K
- Graphics
- Vega 64
- Mac
- Mobile Phone
Hey there,
I have a Hackintosh, installed and configured following this tutorial: [https://github.com/cmer/gigabyte-z3...m/cmer/gigabyte-z390-aorus-master-hackintosh)
The EFI folder is similar - i only have one more kext - VGTab which controls my Vega64 Fans.
This is my setup:
* Gigabyte Z390 Aorus Master (bios F8)
* Intel i9 9900k
* 64GB 3000MHz Corsair Vengeance LPX Black
* 1 x Sapphire Vega64 Nitro+
* 1 x Samsung 970 EVO NVMe M.2 1TB - Mojave instalation
* 1 x Adata 120GB SATA SSD (Clover/EFI boot volume)
The CPU is overclocked to 4.9GHz on all cores at 1.290v. However, in HWMonitor and iStat Pro i get Vcore values from 0.8v to 1.44V which is actually pretty weird - it seems the VCore is set to auto. Is Hackintosh/Clover somehow, overwriting my bios settings, is this even possible?
Thanks in advance!
I have a Hackintosh, installed and configured following this tutorial: [https://github.com/cmer/gigabyte-z3...m/cmer/gigabyte-z390-aorus-master-hackintosh)
The EFI folder is similar - i only have one more kext - VGTab which controls my Vega64 Fans.
This is my setup:
* Gigabyte Z390 Aorus Master (bios F8)
* Intel i9 9900k
* 64GB 3000MHz Corsair Vengeance LPX Black
* 1 x Sapphire Vega64 Nitro+
* 1 x Samsung 970 EVO NVMe M.2 1TB - Mojave instalation
* 1 x Adata 120GB SATA SSD (Clover/EFI boot volume)
The CPU is overclocked to 4.9GHz on all cores at 1.290v. However, in HWMonitor and iStat Pro i get Vcore values from 0.8v to 1.44V which is actually pretty weird - it seems the VCore is set to auto. Is Hackintosh/Clover somehow, overwriting my bios settings, is this even possible?
Thanks in advance!