**** [IOBluetoothHCIController][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controll

Discussion in 'Mountain Lion Desktop Support' started by stasivanov, Sep 20, 2013.

  1. marlopogo1

    marlopogo1

    Joined:
    Apr 25, 2012
    Messages:
    2
    Mobo:
    GIGABYTE LGA 1155 Intel Z77 mini-ITX Motherboard - GA-Z77N-WIFI
    CPU:
    Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155 - BX80637I73770K
    Graphics:
    GIGABYTE GeForce GTX 660 Ti WINDFORCE 2X OC Edition 2048MB GDDR5 - GV-N66TOC-2GD
    Dec 29, 2013 at 1:01 PM #11
    marlopogo1

    marlopogo1

    Joined:
    Apr 25, 2012
    Messages:
    2
    Mobo:
    GIGABYTE LGA 1155 Intel Z77 mini-ITX Motherboard - GA-Z77N-WIFI
    CPU:
    Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155 - BX80637I73770K
    Graphics:
    GIGABYTE GeForce GTX 660 Ti WINDFORCE 2X OC Edition 2048MB GDDR5 - GV-N66TOC-2GD
    I too am having the same issue. Running on GA-Z77N-WIFI. However while I'm writing this post it now shows (in verbose mode) after ... Missing Bluetooth Controller Transport! , "Resetting IOCatalogue".This leads me to believe that the system has not hang. I will wait a bit since I have a slight dimmed flicker on my HDD light.
     
  2. varons666

    varons666

    Joined:
    Jan 15, 2014
    Messages:
    1
    Mobo:
    Win 7
    CPU:
    i7
    Graphics:
    onboard
    Apr 2, 2014 at 6:28 PM #12
    varons666

    varons666

    Joined:
    Jan 15, 2014
    Messages:
    1
    Mobo:
    Win 7
    CPU:
    i7
    Graphics:
    onboard
    Hey guys, i had the same issue but after disabling bluetooth and wifi adapters on windows, 10.8.5 starts up fine.
     
  3. treuben

    treuben

    Joined:
    Apr 4, 2011
    Messages:
    22
    Mobo:
    Gigabyte GA-H67MA-D2H-B3
    CPU:
    i5 2500
    Graphics:
    Nvidia GeForce 8400GS
    Apr 9, 2014 at 9:00 PM #13
    treuben

    treuben

    Joined:
    Apr 4, 2011
    Messages:
    22
    Mobo:
    Gigabyte GA-H67MA-D2H-B3
    CPU:
    i5 2500
    Graphics:
    Nvidia GeForce 8400GS
    this seems to be dependent on system definition in combination with clover plist changes on my system. Perhaps someone clever can give us some pointers as to what options combined with that system definitions might cause it. On my system it either hangs or reboots if it gets this error on system start.
     
  4. master_II

    master_II

    Joined:
    Aug 22, 2012
    Messages:
    19
    Mobo:
    Z87-UD3H
    CPU:
    i7 4770K
    Graphics:
    Gainward GTX 1070 Phoenix GS
    Mac:
    MacBook
    Mobile Phone:
    iOS
    May 5, 2014 at 8:38 AM #14
    master_II

    master_II

    Joined:
    Aug 22, 2012
    Messages:
    19
    Mobo:
    Z87-UD3H
    CPU:
    i7 4770K
    Graphics:
    Gainward GTX 1070 Phoenix GS
    Mac:
    MacBook
    Mobile Phone:
    iOS
    Same Issue here. Got a i7 4770 and a Gigabyte Z87X-UD3H
    Systemdefinition is MacPro3,1 and im running OSX 10.9.2
    I do not use bluetooth.

    However i can boot in safemode

    Im not sure if this is really the source but if i rename the FakeSMC Plugin ACPISensors and rebuild caches the system boots but maybe it only boots because of the cache rebuild.
     
  5. titsmgee

    titsmgee

    Joined:
    May 17, 2011
    Messages:
    520
    Mobo:
    GIGABYTE GA-Z68X-UD3P Rev1.3 (F7)
    CPU:
    Intel i5 2500K @ 4.2
    Graphics:
    Gigabyte HD 6850 Radeon - GV-R685OC-1GB
    Mac:
    MacBook Pro
    Mobile Phone:
    iOS
    May 10, 2014 at 11:33 PM #15
    titsmgee

    titsmgee

    Joined:
    May 17, 2011
    Messages:
    520
    Mobo:
    GIGABYTE GA-Z68X-UD3P Rev1.3 (F7)
    CPU:
    Intel i5 2500K @ 4.2
    Graphics:
    Gigabyte HD 6850 Radeon - GV-R685OC-1GB
    Mac:
    MacBook Pro
    Mobile Phone:
    iOS
    I had the same problem, and i fixed it by simply moving my USB bluetooth to another USB port
     
  6. kogski

    kogski

    Joined:
    Aug 7, 2014
    Messages:
    13
    Mobo:
    GIGABYTE Z97x GAMING 5
    CPU:
    I7 4770K
    Graphics:
    Powercolor R9 290x
    Aug 8, 2014 at 6:12 AM #16
    kogski

    kogski

    Joined:
    Aug 7, 2014
    Messages:
    13
    Mobo:
    GIGABYTE Z97x GAMING 5
    CPU:
    I7 4770K
    Graphics:
    Powercolor R9 290x
    hi im using Asrock Z87 Extreme4 bios 3.0 and my system was stuck after the 1st instal then after reboot this error IOBluetoothHCIController] [SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport!
    i tried what you post but after but it gives me SYSTEm uptime in nanoseconds error

    this flag help me to install the 1st part -v PCIRootUID=0 GraphicsEnabler=No IGPEnabler=No maxmem=4096
    computer specs:
    cpu: intel i7 4770k
    mobo: asrock z87 extreme4
    memory: Kingston HyperX Blu 8GB (2 x 4GB) KHX1333C9D3B1K2/8G DDR3 1333 MHz SDRAM
    videocard: nvidia gtx 660ti -pulled out

    please help what should i do next?!

    photo (1).jpg

    - - - Updated - - -

    help

    hi im using Asrock Z87 Extreme4 bios 3.0 and my system was stuck after the 1st instal then after reboot this error IOBluetoothHCIController] [SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport!
    i tried what you post but after but it gives me SYSTEm uptime in nanoseconds error

    this flag help me to install the 1st part -v PCIRootUID=0 GraphicsEnabler=No IGPEnabler=No maxmem=4096
    computer specs:
    cpu: intel i7 4770k
    mobo: asrock z87 extreme4
    memory: Kingston HyperX Blu 8GB (2 x 4GB) KHX1333C9D3B1K2/8G DDR3 1333 MHz SDRAM
    videocard: nvidia gtx 660ti -pulled out

    please help what should i do next?!

    photo (1).jpg
     
  7. sofatiger51

    sofatiger51

    Joined:
    Jun 26, 2010
    Messages:
    7
    Mobo:
    Asus P6T Deluxe V2
    CPU:
    Intel i7
    Graphics:
    Nvidia GTX 260
    Mobile Phone:
    Android
    Aug 26, 2014 at 10:49 AM #17
    sofatiger51

    sofatiger51

    Joined:
    Jun 26, 2010
    Messages:
    7
    Mobo:
    Asus P6T Deluxe V2
    CPU:
    Intel i7
    Graphics:
    Nvidia GTX 260
    Mobile Phone:
    Android
    @kogski,

    Try disable on board video and put back in your GTX 660 Ti. Nvidia GTX 660 Ti is supported by Mavericks.
    I have a completely different system than yours. In my case I solved it my deleting all Bluetooth Kexts in the USB installer. Then I was able to successfully install Mavericks 10.9.4. Following are my specs:

    Lenovo ThinkServer TS 140
    CPU: Xeon E3-1250 V3
    Video: Intel HD 4600 (on board video)
    MEM: GSkil Ripjaw DDR3 1600 4x 4GB
    wifi card: Rosewill NPE 900 (supported natively by Mavericks)
    Ethernet: Intel I217 ( I used TonyMac Intel e1000 V3 Kexts from Mavericks Multibeast)
    Audio: Realtek: ALC 662
    Socket: 1150

    My is probably the toughest system to hackintosh because no support at all in the net. I can only install OS X using Clover EFI boot loader using legacy install following MacMan Clover install with graphic edit to accept IntelAzulFramebuffer to recognize Intel HD 4600 in the config.plist. I now have to spend some real time to patch my video in order to work on multiple displays. Also audio could be a big challenge to me because ALC 662 is a bitch to make it work. Good luck to your install.
     
  8. Afjewkes

    Afjewkes

    Joined:
    Sep 6, 2014
    Messages:
    16
    Oct 1, 2014 at 5:31 PM #18
    Afjewkes

    Afjewkes

    Joined:
    Sep 6, 2014
    Messages:
    16
    For me this error occurs when my BIOS has (by itself) changed back to vt-d=enabled or intel graphics virtualisation=enabled.

    I fix this by disabling both of these options then saving and exiting BIOS set up. This tends to happen if I've removed the power or done a hard restart for any reason.

    also for some reason my BIOS only shows up via VGA and not via HDMI (gigabyte board)
     
  9. djbisnaga

    djbisnaga

    Joined:
    Oct 15, 2014
    Messages:
    1
    Oct 23, 2014 at 6:19 PM #19
    djbisnaga

    djbisnaga

    Joined:
    Oct 15, 2014
    Messages:
    1
    Hi all,

    I just got through my first Hackintosh installation.

    GA-H87M-D3H
    Intel i7-4770
    EVGA GeForce GTX 760
    2 x 8Gb Corsair Vengeance (used only 1 for installation)
    SSD Samsung 840 EVO 250Gb

    First I did what I saw on another post:
    [​IMG] Originally Posted by guiba2 [​IMG]
    Have you tried this, it worked for me:
    First boot with -s
    Now type the following commands in the EXACT order:

    mount -uw /

    cd /System/Library/Extensions

    mkdir intel_back

    mv AppleIntelHD* AppleIntelF* intel_back/

    touch ../Extensions

    reboot

    Hope I helped, bye!


    Then I disabled VT-d on BIOS and it worked!

    Best!
     
    Last edited by a moderator: Sep 27, 2016
  10. mleduff7

    mleduff7

    Joined:
    Oct 7, 2011
    Messages:
    128
    Mobo:
    Z68X-UD3H-B3 (UEFI) iMac12,2
    CPU:
    3.19 GHz i5 1155 socket
    Graphics:
    XFX AMD Radeon HD 6670
    Oct 24, 2014 at 12:51 AM #20
    mleduff7

    mleduff7

    Joined:
    Oct 7, 2011
    Messages:
    128
    Mobo:
    Z68X-UD3H-B3 (UEFI) iMac12,2
    CPU:
    3.19 GHz i5 1155 socket
    Graphics:
    XFX AMD Radeon HD 6670
    VT-d disabled worked for me. Just upgraded to UEFI on Z68X-UD3H-B3.
     

Share This Page