P
Pls chk the previous post for kext list
Thanks for your help. I now have accelerated graphics working with my I5 8400 CPU and GA-H370M-D3H motherboard on 10.13.6. My motherboard has three graphics outputs - HDMI, DVI-D and VGA. I found that the only the VGA port was sending output once set the Inject Intel flag. During my initial testing I was using my DVI-D output and then the screen would go black after rebooting with the Inject Intel Flag.
I am not using any ig-platform-id or IntelGFX Fake ID in my config.plist. In my Clover/kexts/Other folder I have the following Kexts installed:
FakeSMC.kext - required for Hackintosh
Lilu.kext (V1.2.5) - used for Intel UHD 630 Graphics
WhateverGreen.kext (V1.2.0) - used for Intel UHD Graphics
USBInjectAll.kext - used for USB ports
XHCI-300-series-injector.kext - used for USB ports
During the boot and after the Apple logo, the screen will go black for up to 30 seconds before the sign-in screen appears.
Check this thread for
https://www.tonymacx86.com/threads/success-with-gigabyte-h370m-ds3h-i5-8400-coffee-lake.254051/
for information on how to activate the HDMI output. In my case, I using an old monitor that only has VGA and DVI inputs.
I recommend that anyone trying to get on board graphics to work should setup remote desktop to check if the boot was successful and to try the different graphics output ports.
My system report shows as follows.
Intel UHD Graphics 630:
Chipset Model: Intel UHD Graphics 630
Type: GPU
Bus: Built-In
VRAM (Dynamic, Max): 1536 MB
Vendor: Intel
Device ID: 0x5912
Revision ID: 0x0000
Metal: Supported, feature set macOS GPUFamily1 v3
Now I need to get my audio to work under 10.13.6.