Contribute
Register

Intel SD Card Reader

ammulder

Moderator
Joined
Sep 1, 2014
Messages
3,424
Motherboard
GA-H87N-WIFI
CPU
i7-4790S
Graphics
GT 740
Mac
  1. MacBook Pro
  2. Mac mini
Mobile Phone
  1. iOS
I've got a NUC with a built-in SD card reader. I put a card in, but I don't see it mounted, so it doesn't seem to work out of the box. I saw a thread on making a kext for a USB reader, but this doesn't seem like a USB one to me (at least, I don't see anything for it under XHC).

In IORegistryExplorer, I see:
LPCB@1F = 8086:9d48 (seems like an I/O interface reported to be used for SD cards?)
PSDC@1E,6 = 8086:9d2d (seems like the SD card reader itself?)

Any suggestions would be appreciated.

IOReg: View attachment nuc-without-usbinjectall.ioreg
 

RehabMan

Moderator
Joined
May 3, 2012
Messages
188,247
Motherboard
Intel DH67BL
CPU
i7-2600K
Graphics
HD 3000
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
I've got a NUC with a built-in SD card reader. I put a card in, but I don't see it mounted, so it doesn't seem to work out of the box. I saw a thread on making a kext for a USB reader, but this doesn't seem like a USB one to me (at least, I don't see anything for it under XHC).

In IORegistryExplorer, I see:
LPCB@1F = 8086:9d48 (seems like an I/O interface reported to be used for SD cards?)
PSDC@1E,6 = 8086:9d2d (seems like the SD card reader itself?)

Any suggestions would be appreciated.

IOReg: View attachment 172624

Most PCIe SD card readers not supported -- no drivers...

Note: LPCB is the Intel chipset LPC device (see chipset data sheet for more info).

You should check in Windows to determine which device is the card reader and how it is connected.
 
Top