- Joined
- Feb 14, 2016
- Messages
- 90
- Motherboard
- NUC10i5FNH
- CPU
- Intel i5-10210U
- Graphics
- Intel UHD 630
- Mac
- Mobile Phone
Let me take a look at this. I have been out of pocket for a couple of days with work. You should not run AppleALC with VooDooHDA though. VoodooHDA on its own should suffice. But let me dive into your setup files and get back to you.gatesjunior,
Thank you so much for your contributions here.
I'm running a NUC 10 i7 and am struggling a bit with getting the audio to work. I understand the best we can do at this point is HDMI Audio only (ignoring possible bluetooth or headphone jack). I'm using the sample OC EFI NUC10i76.1 from: [Guide] Intel NUC7/NUC8 using Clover UEFI (NUC7i7Bxx,NUC8i7Bxx,etc), post #894. Great resource and everything went smoothly except the audio.
I've read all the posts, but still don't quite understand your setup. Attached is my EFI (without unique serial numbers, etc.). Below is the file structure.
Also, I ran your suggested command to see which kexts are loaded: it looks like these are the only ones: Lilu, WEG, VirtualSMC, VoodooHDA, IntelMausi and IntelblueToothFirmware. I don't see AppleALC, AppleHDADisabler or USBPorts loaded.
Thoughts/suggestions for audio (and any other improvements)? Many thanks in advance.
View attachment 500302
View attachment 500308
Update:
Just a quick look. You have a couple of the SSDT's in your config but they are NOT enabled. Specifically your RHUB, which is your power USB reset and your thunderbolt SSDT. Also, your APPLEALC.kext file is also in there but also NOT enabled. Try messing with that first and set them correctly and reboot.
Get yourself a PLIST editor. There is one in the App Store I use.
Last edited: