Contribute
Register

Intel NUC 10 Frost Canyon

Looks like I didn't have everything on the EFI partition under an EFI root folder. Fixed that, installer is now booting.

Thanks guys!
 
Looks like I didn't have everything on the EFI partition under an EFI root folder. Fixed that, installer is now booting.

Thanks guys!

Great
 
hi,
if it can be useful this is my last efi
.... sorry for my english....


Hello, I am a newbie, I am using the EFI file you provided, It’s working fine.

But there is a problem, I am using Docker, when I was pulling some images, it always end with ‘checksum fails’ .I found the issue on Github(https://github.com/docker/for-mac/issues/4654), someone solved the problem by deleting the contents of the Cpuid1Data and Cpuid1Mask values.
But when I try to delete the two data, the system boot failed, Can you give me some ideas? Thank you very much!
 
Hello, I am a newbie, I am using the EFI file you provided, It’s working fine.

But there is a problem, I am using Docker, when I was pulling some images, it always end with ‘checksum fails’ .I found the issue on Github(https://github.com/docker/for-mac/issues/4654), someone solved the problem by deleting the contents of the Cpuid1Data and Cpuid1Mask values.
But when I try to delete the two data, the system boot failed, Can you give me some ideas? Thank you very much!
Try this https://www.tonymacx86.com/threads/intel-nuc-10-frost-canyon.289485/post-2153839
 
Hello,
I'm totally new here and first I would like to thank you all for your work, it's incredible. I've got my NUC10i7 just this morning and here I am, running Catalina on it (even though I'm currently typing on an older OSX VM).

Like many I guess, I've got a display attached to the HDMI port of my NUC, and here is my problem: the image quality is really subpar. Fonts are ugly, graphics are a bit crude/too sharp. I'm not sure how to describe this but globally looking at the same screen when it's plugged onto my OSX VM (radeon Mac Edition), or my Windows VM (MSI Radeon R9 270x) is great and the quality is really superior to what I see when the NUC uses the display.

Display settings are OK (native resolution, display name/model properly found).

I've tried to "catch it" with a screen capture, but the capture itself looks really good, so I'm not sure where to start looking for a fix :/ (I've tested a high quality HDMI cable, same result)

I've made a photo with my phone: https://www.patpro.net/cafesale/IMG_20200731.jpg

I've used gibMacOS, then UniBeast to create my install USB key, I've used NUC10i7OC5.9.EFI to populate the EFI partition of the key and later the EFI partition of the NUC NVMe.

Any hint?
 
Hello,
I'm totally new here and first I would like to thank you all for your work, it's incredible. I've got my NUC10i7 just this morning and here I am, running Catalina on it (even though I'm currently typing on an older OSX VM).

Like many I guess, I've got a display attached to the HDMI port of my NUC, and here is my problem: the image quality is really subpar. Fonts are ugly, graphics are a bit crude/too sharp. I'm not sure how to describe this but globally looking at the same screen when it's plugged onto my OSX VM (radeon Mac Edition), or my Windows VM (MSI Radeon R9 270x) is great and the quality is really superior to what I see when the NUC uses the display.

Display settings are OK (native resolution, display name/model properly found).

I've tried to "catch it" with a screen capture, but the capture itself looks really good, so I'm not sure where to start looking for a fix :/ (I've tested a high quality HDMI cable, same result)

I've made a photo with my phone: https://www.patpro.net/cafesale/IMG_20200731.jpg

I've used gibMacOS, then UniBeast to create my install USB key, I've used NUC10i7OC5.9.EFI to populate the EFI partition of the key and later the EFI partition of the NUC NVMe.

Any hint?
Which post did you get the EFI folder from? There are several.
 
Back
Top