Intel NUC 10 Frost Canyon

[dolgarrenan]

I can confirm the new NUC10 with i7 is working, I'll post an update a bit later, busy with work!

 

[svandive]

I can confirm the new NUC10 with i7 is working, I'll post an update a bit later, busy with work!

You sir are Awesome!! This is great news and I really look forward to learning from what you've done.

Thank You!!

 

[svandive]

Configuring this gets past the EXITBS:START

Kernel->Emulate->Cpuid1Data(Data)->EB060800 00000000 00000000 00000000
Kernel->Emulate->Cpuid1Mask(Data)->FFFFFFFF 00000000 00000000 00000000

or

Kernel->Emulate->Cpuid1Data(Data)->EC060800 00000000 00000000 00000000
Kernel->Emulate->Cpuid1Mask(Data)->FFFFFFFF 00000000 00000000 00000000

on to the next Halt:

VirtualSMC efend: @ authenticated rest

 

[zavrus]

Guys, I also managed to boot. I originally followed this guide to prepare everything. And from here I copied the SetupVirtualMap: YES that now I turned to NO and that altogether with spoof CPU allowed to boot.

So far works:
Bluetooth
Ethernet

Doesn't work:
WiFi
Display
Thunderbolt

Will dig further.
PS: I've read a lot of concerns Samsung 970 Evo Plus won't work - but in my case it works with latest FW.

Some pictures and my current EFI folder are enclosed.

 

[svandive]

Did you need to do anything funky in the BIOS? Is your Thunderbolt enabled still in BIOS?

 

[zavrus]

TB is enabled.
I disabled Secure boot and VT-d - the rest is almost the default values.

 

[dolgarrenan]

@svandive you just beat me to it, I'm way too busy at work lol. Here is my EFI in case anyone might need it, perhaps we could extend this post a bit to further improve NUC10 performance!

I have unlocked MSR register, so no xcpm quirks on my EFI.

 

[svandive]

Guys, I also managed to boot. I originally followed this guide to prepare everything. And from here I copied the SetupVirtualMap: YES that now I turned to NO and that altogether with spoof CPU allowed to boot.

So far works:
Bluetooth
Ethernet

Doesn't work:
WiFi
Display
Thunderbolt

Will dig further.
PS: I've read a lot of concerns Samsung 970 Evo Plus won't work - but in my case it works with latest FW.

Your EFI is working for me to install, thank you!! I'm hoping to dig in to what's not working as soon as I have the foundation up and running.

 

[svandive]

@svandive you just beat me to it, I'm way too busy at work lol. Here is my EFI in case anyone might need it, perhaps we could extend this post a bit to further improve NUC10 performance!

I have unlocked MSR register, so no xcpm quirks on my EFI.

Fantastic, I love all the action and excitement!! For me this doesn't end till we have Everything (with in reason I suppose) working that we can get working. I think we should be able to modify the SSDT that is working on @CaseySJ Z490 for use here (fingers crossed).... Since I also have the CFGLock disabled I'm going to give your EFI a run too, once again Thanks for all the work

 

[zavrus]

Thank everybody in this thread )). I am sure we will manage all drivers together