Intel NUC 10 Frost Canyon

[Leesureone]

As i am not an expert, I would like to know the procedure to install catalina on nuc10.
I mean the procedure step by step to follow is that one indicated here

UniBeast: Install macOS Catalina on Any Supported Intel-based PC

The following guide is a complete walkthrough for updating to or installing a fresh version of macOS Catalina. It requires no experience and all of the basic installation and post-installation tools are available on tonymacx86.com. Table of Contents Step 1: Download macOS Catalina Step 2...

www.tonymacx86.com

by replacing the efi file with someone attached to this forum?
I tried with unibeast, with uefi boot, but the usb does not appear in the boot of nuc10i5.
Probably there is something that I miss and it is not clear. Can you help me by indicating a place where I can follow all the instructions?

That’s exactly right, if you are new to this using Unibeast it is the easier way. Make sure you chose the UEFI boot option though. Once it’s done the EFI folder on your usb drive should still be visible. If not you will need to mount it using EFI Agent or OpenCore Configurator or whatever you prefer. Then delete the entire EFI folder created by Zuni East, empty the trash and then copy and paste the NUC10 version from somewhere in this thread.

 

[picchitta]

That’s exactly right, if you are new to this using Unibeast it is the easier way. Make sure you chose the UEFI boot option though. Once it’s done the EFI folder on your usb drive should still be visible. If not you will need to mount it using EFI Agent or OpenCore Configurator or whatever you prefer. Then delete the entire EFI folder created by Zuni East, empty the trash and then copy and paste the NUC10 version from somewhere in this thread.

Thank you very much, I tried and it works. But I cannot see my nvme memory in disk utility and I cannot continue. This memory is Silicon power M2 512.

 

[Leesureone]

Thank you very much, I tried and it works. But I cannot see my nvme memory in disk utility and I cannot continue. This memory is Silicon power M2 512.

Once the installer finished loading you have to go disk utility and format the disk. Did you do that?

6. For a new installation of macOS, you MUST erase and format the destination drive according to the following steps before continuing.
a. From the macOS Utilities menu, open Disk Utility
b. In upper left corner, choose View. Then Show All Devices.
c. Highlight your target drive for the Catalina installation in left column.
d. Click Erase button
e. For Name: type Catalina (You can rename it later)
f. For Format: choose APFS
g. Click Erase
h. Close Disk Utility

 

[er1c2]

There must be something wrong with the IntelBluetooth.kext. I bought a couple of new bluetooth mice but they still can't work properly. Others bluetooth devices just seem ok for now.

 

[daTscharlie]

The good news is AppleALC Audio is working on Realtek internal device with almost any layoutid with the latest drivers ... too bad it's only working when speakers are connected during boot

 

[Leesureone]

There must be something wrong with the IntelBluetooth.kext. I bought a couple of new bluetooth mice but they still can't work properly. Others bluetooth devices just seem ok for now.

It’s working fine for me, it sees my TV and a small Bluetooth keyboard and trackpad combo I have. Seems like a configuration issue.

 

[daTscharlie]

There must be something wrong with the IntelBluetooth.kext. I bought a couple of new bluetooth mice but they still can't work properly. Others bluetooth devices just seem ok for now.

use the latest drivers @ https://downloads.tlhub.cn/

 

[innerd]

The good news is AppleALC Audio is working on Realtek internal device with almost any layoutid with the latest drivers ... too bad it's only working when speakers are connected during boot

Any layout for hdmi?

 

[er1c2]

use the latest drivers @ https://downloads.tlhub.cn/

Am I just downloading the latest kexts and replacing them to the EFI/OC/Kexts and restart the computer then it will load the latest drivers, right?

 

[er1c2]

It’s working fine for me, it sees my TV and a small Bluetooth keyboard and trackpad combo I have. Seems like a configuration issue.

Can you share your EFI for me to test? Thanks~