intel hd3000 64 mb shared memory

[andrigis]

i had installed maverick on my asus zenbook ux32a core i3 2367m chipset HM76, with clover efi bootloader. after installation i can't use graphic kext.. it say 64 mb shared memory and no kext loaded..
please how can i do for that?..

 

[beta9092]

i had installed maverick on my asus zenbook ux32a core i3 2367m chipset HM76, with clover efi bootloader. after installation i can't use graphic kext.. it say 64 mb shared memory and no kext loaded..
please how can i do for that?..

do you have in clover √ Graphicks - Inject Intel, and maybe you need write ig-platform-id, fake id in Device section.

--update--

make patch DSDT from Rehab repository laptop in MacIASL for HD3000 lvyBridge(7series).

 

[andrigis]

do you have in clover √ Graphicks - Inject Intel, and maybe you need write ig-platform-id, fake id in Device section.

--update--

make patch DSDT from Rehab repository laptop in MacIASL for HD3000 lvyBridge(7series).

thanks for your reply..
yes.. i choose Inject Intel in clover..

my device id = 0116 and core i3 sandy bridge.. btw what number IGPlatformID must be in use, and can be patch DSDT from rehab repository for HD3000 ivybridge?

 

[beta9092]

thanks for your reply..
yes.. i choose Inject Intel in clover..

my device id = 0116 and core i3 sandy bridge.. btw what number IGPlatformID must be in use, and can be patch DSDT from rehab repository for HD3000 ivybridge?

Do you have chip Intel HM76?

then
you must choose "HD3000 on 7 series" patch

 

[andrigis]

Do you have chip Intel HM76?

then
you must choose "HD3000 on 7 series" patch

how to write ig-plaform-id and fake id? i'am confuse about that procedure.. maybe u can help me with exact procedure..

 

[beta9092]

how to write ig-plaform-id and fake id? i'am confuse about that procedure.. maybe u can help me with exact procedure..

In clover boot GUI options - Graf.Inect (when √ IntelInject) there is fake string(by default - "0x000000000")

try - 0x01660009

(from 0 to 9, a, b) change the last value.

 

[andrigis]

In clover boot GUI options - Graf.Inect (when √ IntelInject) there is fake string(by default - "0x000000000")

try - 0x01660009

(from 0 to 9, a, b) change the last value.

not work..

till now i said suck for that....

 

[beta9092]

not work..

till now i said suck for that....

try - 0x0162000*

and see here http://www.insanelymac.com/forum/forum/151-graphics-cards/

 

[RehabMan]

thanks for your reply..
yes.. i choose Inject Intel in clover..

my device id = 0116 and core i3 sandy bridge.. btw what number IGPlatformID must be in use, and can be patch DSDT from rehab repository for HD3000 ivybridge?

HD3000 does not use ig-platform-id. It uses snb-platform-id.

Please provide complete details in your profile.

System: manufacturer/model
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx). For a laptop, these details are important and affect critical installation procedures.

 

[andrigis]

HD3000 does not use ig-platform-id. It uses snb-platform-id.

Please provide complete details in your profile.

System: manufacturer/model
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx). For a laptop, these details are important and affect critical installation procedures.

this is my typical laptop
System : Asus UX32a
CPU: core i3 2367M @1,4GHz
Chipset : Intel Sandybridge Rev 09, Southbridge = HM76 Rev. 04
Graphics: HD3000 rev 09
Bios Version : American Megatrands asus ux32a.212


i think only that.. please help me...