Contribute
Register

Intel HD Graphics Framebuffer Edits - Desktop

Status
Not open for further replies.
Without WhateverGreen, boot with both displays attached, attach files
If both displays are not working, see Post #1/Clover Framebuffer Patches/2
Paste the patch (Item 17) to your config.plist as noted:
Screen Shot 2018-10-27 at 5.21.19 PM.png
Save, install, restart, reply with new files
 
Last edited:
I think I followed your directions correctly, same result. The files are attached.

I pasted the patch to config TONY.plist/KernelAndKextPatches/KextsToPatch/.
I booted using config TONY. The 3 files from this boot are in the After Patch zip.
When you say install, what do you mean? I put all the Item 17 info in the config TONY, then saved.
 

Attachments

  • After Patch.zip
    3.6 MB · Views: 77
  • Whatever Green Before Patch.zip
    3.6 MB · Views: 69
I think I followed your directions correctly,
My mistake, typo; Post #638 fixed.
Meant Without WhateverGreen, not With WhateverGreen
Patch is correct
Start over, attach new files
 
Last edited:
My mistake, typo; Post #538 fixed.
Meant Without WhateverGreen, not With WhateverGreen
Patch is correct
Start over, attach new files

#538 or #638? Im assuming 638.
 
Please see both attached files. Both without Whatever green and both monitors plugged in.
 

Attachments

  • Before Patch.zip
    3.6 MB · Views: 106
  • After Patch.zip
    3.6 MB · Views: 115
Anyone knows how to fix dual monitor on i5-7400 HD630?

I've everything working but that.

Thank you in advanced.
Just curious if you'd be willing to share your EFI folder? I have dual monitors working fine with my HD 630 on i5-7400 but can't get it to wake from sleep properly.
 
Patch did not work. Last suggestion, try DP2DVI adapter

I'll probably just downgrade back to 10.13 where dual monitors works well.
 
Hi, anyone can help me with frame buffer patching ? I have hdmi output until desktop, after "no signal", second cable and I got desktop on vga. any suggestion ?
 

Attachments

  • debug_4441.zip
    2.5 MB · Views: 144
I have hdmi output until desktop, after "no signal", second cable and I got desktop on vga. any suggestion ?
Both displays are connected to DP connectors in the framebuffer.
Gigabyte/B360M H product page is useless. A different site suggests the only video connectors are HDMI and VGA.

Whichever display is connected to the HDMI port should be changed to a HDMI connector. macOS officially does not support VGA, the work around is a DP/HDMI/DVI to VGA adapters.

See [Guide] Intel Framebuffer patching using WhateverGreen
 
Status
Not open for further replies.
Back
Top